MSP 125 FINAL STUDY TEST
QUESTIONS AND ANSWERS
OSHA - Correct Answers -The ________ is an agency of the federal government that
sets and enforces regulations for workplace safety.
NIOSH (National Institute for Occupational Safety and Health) - Correct Answers -
________ is a federal agency responsible for conducting research and making
recommendation for the prevention of work-related injury and illness.
PPE - Correct Answers -________ refers to safety equipment that is to be worn to
protect a person.
lockout - Correct Answers -A ________ employs the use of locks or tags to disable
equipment.
tagout - Correct Answers -Maintenance personnel use ________ devices to prevent
powering up equipment.
lockout - Correct Answers -In ________ , tags are replaced with padlocks or other
lockout devices.
HMIS (Hazardous Material Identification System) - Correct Answers -________ offers
highly visual systems that serve as warnings of potential dangers.
MSDS (Material Safety Data Sheet) - Correct Answers -Companies rely on ________
information to guide training and protect workers.
PEL (Permissible Exposure Limit) - Correct Answers -________ is a measure of
maximum amount of a substance that someone can be exposed to.
TWA (Time Weighted Average) - Correct Answers -A(n) ________ states an amount
that should not be exceeded within an 8-hour time frame.
STEL (Short Term Exposure Limit) - Correct Answers -A(n) ________ is a concentration
of exposure that is permissible for 15 minutes at a time.
PPB - Correct Answers -________ stands for parts per billion of a substance.
flash - Correct Answers -The ________ point, or lowest temperature where the
substance can be ignited, is listed in this section.
, LEL (Lower Explosive Limit) - Correct Answers -The ________ is the lowest
concentration of the substance in air that will burn or explode if ignited.
UEL (Upper Explosive Limit) - Correct Answers -The ________ is the highest
concentration of the substance in air that will burn or explode if ignited.
Acute - Correct Answers -health effects are short-term
EPA - Correct Answers -The ________ is a federal agency whose purpose is to protect
human health and the environment.
A - Correct Answers -Class ________ fires are what OSHA defines as those involving
ordinary combustible, such as paper, cloth, wood, rubber, and many plastics.
Weekly - Correct Answers -________ inspections might include checking first aid
supplies nd ensuring that all hazardous materials are labeled appropriately.
English - Correct Answers -The standard system of measurement in the United States
is the ________ system.
Inch - Correct Answers -That system of measurement is bade on the ________.
Millimeter - Correct Answers -The meter is the basic unit used in the metric system of
measurement, but the ________ is most commonly used in the machining industry.
SI (System International) - Correct Answers -In global manufacturing and in the
machining industry, the metric system is sometimes referred to as the International
System of Units or ________.
Order of operation - Correct Answers -________ is the principle that certain
mathematical operations must be done in a certain order to correctly perform
calculations.
Two - Correct Answers -A ratio is a comparison between ________ numbers.
Each other - Correct Answers -A proportion is two ratios that are equal to ________
Geometry - Correct Answers -________ is math involving shapes and their
relationships.
Parallel - Correct Answers -The term ________ refers to lines or surfaces that , in
theory, will never intersect, or touch, if extended.
90 - Correct Answers -Perpendicular lines or surfaces are those that intersect at a
________-degree angles.
QUESTIONS AND ANSWERS
OSHA - Correct Answers -The ________ is an agency of the federal government that
sets and enforces regulations for workplace safety.
NIOSH (National Institute for Occupational Safety and Health) - Correct Answers -
________ is a federal agency responsible for conducting research and making
recommendation for the prevention of work-related injury and illness.
PPE - Correct Answers -________ refers to safety equipment that is to be worn to
protect a person.
lockout - Correct Answers -A ________ employs the use of locks or tags to disable
equipment.
tagout - Correct Answers -Maintenance personnel use ________ devices to prevent
powering up equipment.
lockout - Correct Answers -In ________ , tags are replaced with padlocks or other
lockout devices.
HMIS (Hazardous Material Identification System) - Correct Answers -________ offers
highly visual systems that serve as warnings of potential dangers.
MSDS (Material Safety Data Sheet) - Correct Answers -Companies rely on ________
information to guide training and protect workers.
PEL (Permissible Exposure Limit) - Correct Answers -________ is a measure of
maximum amount of a substance that someone can be exposed to.
TWA (Time Weighted Average) - Correct Answers -A(n) ________ states an amount
that should not be exceeded within an 8-hour time frame.
STEL (Short Term Exposure Limit) - Correct Answers -A(n) ________ is a concentration
of exposure that is permissible for 15 minutes at a time.
PPB - Correct Answers -________ stands for parts per billion of a substance.
flash - Correct Answers -The ________ point, or lowest temperature where the
substance can be ignited, is listed in this section.
, LEL (Lower Explosive Limit) - Correct Answers -The ________ is the lowest
concentration of the substance in air that will burn or explode if ignited.
UEL (Upper Explosive Limit) - Correct Answers -The ________ is the highest
concentration of the substance in air that will burn or explode if ignited.
Acute - Correct Answers -health effects are short-term
EPA - Correct Answers -The ________ is a federal agency whose purpose is to protect
human health and the environment.
A - Correct Answers -Class ________ fires are what OSHA defines as those involving
ordinary combustible, such as paper, cloth, wood, rubber, and many plastics.
Weekly - Correct Answers -________ inspections might include checking first aid
supplies nd ensuring that all hazardous materials are labeled appropriately.
English - Correct Answers -The standard system of measurement in the United States
is the ________ system.
Inch - Correct Answers -That system of measurement is bade on the ________.
Millimeter - Correct Answers -The meter is the basic unit used in the metric system of
measurement, but the ________ is most commonly used in the machining industry.
SI (System International) - Correct Answers -In global manufacturing and in the
machining industry, the metric system is sometimes referred to as the International
System of Units or ________.
Order of operation - Correct Answers -________ is the principle that certain
mathematical operations must be done in a certain order to correctly perform
calculations.
Two - Correct Answers -A ratio is a comparison between ________ numbers.
Each other - Correct Answers -A proportion is two ratios that are equal to ________
Geometry - Correct Answers -________ is math involving shapes and their
relationships.
Parallel - Correct Answers -The term ________ refers to lines or surfaces that , in
theory, will never intersect, or touch, if extended.
90 - Correct Answers -Perpendicular lines or surfaces are those that intersect at a
________-degree angles.
