FDNY G-60 EXAM NEWEST 2026/2027 ACTUAL EXAM|
COMPLETE 100 REAL EXAM QUESTIONS AND
CORRECT VERIFIED ANSWERS/ ALREADY GRADED
A+| G-60 FDNY TEST PREP 2026 (BRAND NEW!!)
1. Who must personally perform any hot work operation using
a flammable gas in NYC?
A. A licensed electrician
B. Any construction worker over 18
C. A Certificate of Fitness (COF) holder
D. The site safety manager
Answer: C
Rationale: A critical code change mandates that any hot work
operation using a flammable gas must be personally performed
by a valid COF holder. Simply supervising is not enough if you
are the one doing the work.
1
,2. How long is a site-specific permanent permit valid?
A. 30 days
B. 12 months
C. 24 months
D. 3 years
Answer: B
Rationale: A site-specific permanent permit is valid for 12
months. A temporary permit can be issued for less than 12
months, but a citywide permit is only valid for up to 30 days.
3. A city-wide permit for hot work is valid for a maximum of
how many days?
A. 10 days
B. 30 days
2
,C. 90 days
D. 180 days
Answer: B
Rationale: Unlike site-specific permits, a citywide permit allows
work at various locations but is strictly limited to a 30-day
validity period.
4. What is the minimum age requirement to obtain a G-60
Certificate of Fitness?
A. 18 years old
B. 21 years old
C. 25 years old
D. No minimum
Answer: A
Rationale: Candidates must be at least 18 years of age to
apply for and receive a Certificate of Fitness from the FDNY.
3
, 5. If a torch operation is discontinued for one hour or more,
what must be done?
A. Leave the torch valve open for restart
B. Disconnect the cylinder entirely
C. Close the torch valve and completely shut the gas supply
D. Nothing, it is safe to leave
Answer: C
Rationale: To prevent accidental gas buildup or leaks, if hot
work stops for 60 minutes or longer, the gas supply to the torch
must be fully shut off.
6. For citywide hot work operations, how many hours in
advance must the owner of the premises be notified in
writing?
A. 12 hours
4
COMPLETE 100 REAL EXAM QUESTIONS AND
CORRECT VERIFIED ANSWERS/ ALREADY GRADED
A+| G-60 FDNY TEST PREP 2026 (BRAND NEW!!)
1. Who must personally perform any hot work operation using
a flammable gas in NYC?
A. A licensed electrician
B. Any construction worker over 18
C. A Certificate of Fitness (COF) holder
D. The site safety manager
Answer: C
Rationale: A critical code change mandates that any hot work
operation using a flammable gas must be personally performed
by a valid COF holder. Simply supervising is not enough if you
are the one doing the work.
1
,2. How long is a site-specific permanent permit valid?
A. 30 days
B. 12 months
C. 24 months
D. 3 years
Answer: B
Rationale: A site-specific permanent permit is valid for 12
months. A temporary permit can be issued for less than 12
months, but a citywide permit is only valid for up to 30 days.
3. A city-wide permit for hot work is valid for a maximum of
how many days?
A. 10 days
B. 30 days
2
,C. 90 days
D. 180 days
Answer: B
Rationale: Unlike site-specific permits, a citywide permit allows
work at various locations but is strictly limited to a 30-day
validity period.
4. What is the minimum age requirement to obtain a G-60
Certificate of Fitness?
A. 18 years old
B. 21 years old
C. 25 years old
D. No minimum
Answer: A
Rationale: Candidates must be at least 18 years of age to
apply for and receive a Certificate of Fitness from the FDNY.
3
, 5. If a torch operation is discontinued for one hour or more,
what must be done?
A. Leave the torch valve open for restart
B. Disconnect the cylinder entirely
C. Close the torch valve and completely shut the gas supply
D. Nothing, it is safe to leave
Answer: C
Rationale: To prevent accidental gas buildup or leaks, if hot
work stops for 60 minutes or longer, the gas supply to the torch
must be fully shut off.
6. For citywide hot work operations, how many hours in
advance must the owner of the premises be notified in
writing?
A. 12 hours
4
