Page 1 of 92
R8 Limited Conveyor Exam Practice Exam -
Questions with Correct Answers &
Explanations | Graded A+ Study Guide.
Q1. Which Connecticut license specifically authorizes a person
to perform installation, maintenance, alteration, or repair of
conveyor systems?
✅ B. R-8 Limited Conveyor Journeyperson
Rationale: The R-8 Limited Conveyor Journeyperson license
authorizes work on conveyor systems only while employed by a
licensed contractor. The R-7 is the contractor equivalent, not the
journeyperson license .
Q2. What is the primary restriction of the R-8 Limited
Conveyor Journeyperson license regarding equipment type?
✅ C. May NOT perform work on any freight elevator
,Page 2 of 92
Rationale: The R-8 license explicitly excludes work on freight
elevators. This is a critical distinction—conveyor work is
permitted, but freight elevator work is prohibited regardless of
the situation .
Q3. Under what condition must an R-8 Limited Conveyor
Journeyperson perform their work?
✅ B. Only while employed by a licensed R-7 Conveyor
Contractor
Rationale: The R-8 Journeyperson must work under a licensed R-7
Contractor, who holds the primary responsibility for the work. The
R-8 cannot work as an independent contractor or without
supervision .
Q4. According to Connecticut regulations, which license type
is the "contractor" equivalent for conveyor work?
✅ C. R-7 Limited Conveyor Contractor
,Page 3 of 92
Rationale: The R-7 license is the contractor license that allows a
business to contract for conveyor work and employ R-8
journeypersons. It requires significantly more experience (6,000
total hours) than the R-8 .
Q5. What is the minimum on-the-job training (OJT) hour
requirement to qualify for the R-8 Limited Conveyor
Journeyperson license?
✅ B. 4,000 hours
Rationale: The R-8 license requires 4,000 hours of on-the-job
training, typically completed through a registered apprenticeship
program or equivalent experience .
Q6. Which activity is specifically prohibited for an R-8
trainee?
✅ B. Freight Elevator Modernization
, Page 4 of 92
Rationale: The R-8 trainee program explicitly excludes work on
freight elevators. The scope includes baggage handling systems,
package handling conveyors, chain conveyors, and Vertical
Reciprocating Conveyors (VRCs), but not freight elevators .
Q7. According to Connecticut R-8 trainee requirements,
training must include a working knowledge of which
standard?
✅ B. ANSI/ASME Standard B20.1
Rationale: The R-8 trainee program requires a working
knowledge of ANSI/ASME Standard B20.1, which covers safety
standards for conveyors. This is distinct from NEC (electrical) or
other standards .
Q8. What is the total minimum hours of on-the-job training
required for an R-7 Limited Conveyor Contractor license?
✅ C. 6,000 hours
R8 Limited Conveyor Exam Practice Exam -
Questions with Correct Answers &
Explanations | Graded A+ Study Guide.
Q1. Which Connecticut license specifically authorizes a person
to perform installation, maintenance, alteration, or repair of
conveyor systems?
✅ B. R-8 Limited Conveyor Journeyperson
Rationale: The R-8 Limited Conveyor Journeyperson license
authorizes work on conveyor systems only while employed by a
licensed contractor. The R-7 is the contractor equivalent, not the
journeyperson license .
Q2. What is the primary restriction of the R-8 Limited
Conveyor Journeyperson license regarding equipment type?
✅ C. May NOT perform work on any freight elevator
,Page 2 of 92
Rationale: The R-8 license explicitly excludes work on freight
elevators. This is a critical distinction—conveyor work is
permitted, but freight elevator work is prohibited regardless of
the situation .
Q3. Under what condition must an R-8 Limited Conveyor
Journeyperson perform their work?
✅ B. Only while employed by a licensed R-7 Conveyor
Contractor
Rationale: The R-8 Journeyperson must work under a licensed R-7
Contractor, who holds the primary responsibility for the work. The
R-8 cannot work as an independent contractor or without
supervision .
Q4. According to Connecticut regulations, which license type
is the "contractor" equivalent for conveyor work?
✅ C. R-7 Limited Conveyor Contractor
,Page 3 of 92
Rationale: The R-7 license is the contractor license that allows a
business to contract for conveyor work and employ R-8
journeypersons. It requires significantly more experience (6,000
total hours) than the R-8 .
Q5. What is the minimum on-the-job training (OJT) hour
requirement to qualify for the R-8 Limited Conveyor
Journeyperson license?
✅ B. 4,000 hours
Rationale: The R-8 license requires 4,000 hours of on-the-job
training, typically completed through a registered apprenticeship
program or equivalent experience .
Q6. Which activity is specifically prohibited for an R-8
trainee?
✅ B. Freight Elevator Modernization
, Page 4 of 92
Rationale: The R-8 trainee program explicitly excludes work on
freight elevators. The scope includes baggage handling systems,
package handling conveyors, chain conveyors, and Vertical
Reciprocating Conveyors (VRCs), but not freight elevators .
Q7. According to Connecticut R-8 trainee requirements,
training must include a working knowledge of which
standard?
✅ B. ANSI/ASME Standard B20.1
Rationale: The R-8 trainee program requires a working
knowledge of ANSI/ASME Standard B20.1, which covers safety
standards for conveyors. This is distinct from NEC (electrical) or
other standards .
Q8. What is the total minimum hours of on-the-job training
required for an R-7 Limited Conveyor Contractor license?
✅ C. 6,000 hours
