1 of 65
Definition
Pressure Equipment Repair and Alteration Requirements
This covers inspection and certification and other requirements for
repairs andalterations to pressure equipment.
Give this one a try later!
AB-514 AB-512
AB-513 AB-515
Don't know?
, 2 of 65
Term
API RP-576 and NBIC Part 2 covers what?
Give this one a try later!
an owner/users Certificate of Authorization Permit (CAP) or by inspection
companies that hold a CAP authorizing them to provide integrity assessment
services to owners. AB-515 covers the quality management system requirements
for inspection companies.
information regarding the inspection and servicing of pressure-relief
devices. The applicable information in these documents should be used to
ensure that the pressure-relief devices are inspected maintained and
serviced in accordance with this section.
Inspection of Pressure Relieving Devices
The Inspector, except as otherwise provided for in Qualifications of Persons
Performing Inspections. The Inspector shall normally be at the site to conduct
and supervise the internal inspections of boilers and pressure vessels.
Don't know?
3 of 65
Term
A person who inspects and certifies boilers and pressure vessels
under an owner-user or inspection company s CAP must hold the
,appropriate Alberta in-service Certificate of Competency. True or
False?
Give this one a try later!
True
ABSA. Certificate holders who construct and repair pressure equipment, service
pressure relief devices, or who provide integrity assessment services (inspection
companies) are posted on absa.ca website.
True: This person is referred to as an ISI (In-Service Inspector) in this
document. Certificate of Competency and qualification requirements for in-
service inspectors are covered in Information Bulletin IB02- 002, which is
posted on the ABSA website www.absa.ca.
The Inspector must ensure that the corrosion (condition) monitoring locations
(CML) are suitable. They must also review and accept all NDE results and ensure
timely follow-up action for any results that are questionable.
Don't know?
4 of 65
Term
ABSA Safety Codes Officers who inspect and certify pressure
equipment must hold what?
Give this one a try later!
, The required Safety Codes Officer certification and designated powers
under the Safety Codes Act. Sections 34 and 35 of the Safety Codes Act
cover the powers that the Safety Codes Officer may exercise in performing
inspections, reviews, and evaluations
True: This person is referred to as an ISI (In-Service Inspector) in this
document. Certificate of Competency and qualification requirements for in-
service inspectors are covered in Information Bulletin IB02- 002, which is posted
on the ABSA website www.absa.ca.
Yes however the ISI must be directly involved in the inspection activity and may
be assisted by persons who do not hold an in-service inspector s Certificate of
Competency, provided these persons have been appropriately trained and
qualified in accordance with their employers registered quality management
system. In such cases: the ISI is responsible for all inspection activities; suitable
records must be maintained to document the training experience and
competence verification of the inspectors; inspections must be completed in
accordance with detailed inspection plans and
checklists that are approved by the ISI; all inspection and examination records
must be evaluated and approved by the ISI. Persons who perform
nondestructive examinations do not require an ISI (refer to Section 16).
True.
Don't know?
5 of 65
Term
The equipment inspected that is subject to annual fees is all that is
required to be inspected by SBSA, true or False?
Give this one a try later!
Definition
Pressure Equipment Repair and Alteration Requirements
This covers inspection and certification and other requirements for
repairs andalterations to pressure equipment.
Give this one a try later!
AB-514 AB-512
AB-513 AB-515
Don't know?
, 2 of 65
Term
API RP-576 and NBIC Part 2 covers what?
Give this one a try later!
an owner/users Certificate of Authorization Permit (CAP) or by inspection
companies that hold a CAP authorizing them to provide integrity assessment
services to owners. AB-515 covers the quality management system requirements
for inspection companies.
information regarding the inspection and servicing of pressure-relief
devices. The applicable information in these documents should be used to
ensure that the pressure-relief devices are inspected maintained and
serviced in accordance with this section.
Inspection of Pressure Relieving Devices
The Inspector, except as otherwise provided for in Qualifications of Persons
Performing Inspections. The Inspector shall normally be at the site to conduct
and supervise the internal inspections of boilers and pressure vessels.
Don't know?
3 of 65
Term
A person who inspects and certifies boilers and pressure vessels
under an owner-user or inspection company s CAP must hold the
,appropriate Alberta in-service Certificate of Competency. True or
False?
Give this one a try later!
True
ABSA. Certificate holders who construct and repair pressure equipment, service
pressure relief devices, or who provide integrity assessment services (inspection
companies) are posted on absa.ca website.
True: This person is referred to as an ISI (In-Service Inspector) in this
document. Certificate of Competency and qualification requirements for in-
service inspectors are covered in Information Bulletin IB02- 002, which is
posted on the ABSA website www.absa.ca.
The Inspector must ensure that the corrosion (condition) monitoring locations
(CML) are suitable. They must also review and accept all NDE results and ensure
timely follow-up action for any results that are questionable.
Don't know?
4 of 65
Term
ABSA Safety Codes Officers who inspect and certify pressure
equipment must hold what?
Give this one a try later!
, The required Safety Codes Officer certification and designated powers
under the Safety Codes Act. Sections 34 and 35 of the Safety Codes Act
cover the powers that the Safety Codes Officer may exercise in performing
inspections, reviews, and evaluations
True: This person is referred to as an ISI (In-Service Inspector) in this
document. Certificate of Competency and qualification requirements for in-
service inspectors are covered in Information Bulletin IB02- 002, which is posted
on the ABSA website www.absa.ca.
Yes however the ISI must be directly involved in the inspection activity and may
be assisted by persons who do not hold an in-service inspector s Certificate of
Competency, provided these persons have been appropriately trained and
qualified in accordance with their employers registered quality management
system. In such cases: the ISI is responsible for all inspection activities; suitable
records must be maintained to document the training experience and
competence verification of the inspectors; inspections must be completed in
accordance with detailed inspection plans and
checklists that are approved by the ISI; all inspection and examination records
must be evaluated and approved by the ISI. Persons who perform
nondestructive examinations do not require an ISI (refer to Section 16).
True.
Don't know?
5 of 65
Term
The equipment inspected that is subject to annual fees is all that is
required to be inspected by SBSA, true or False?
Give this one a try later!
