TEXAS STATE INSPECTOR SAFETY CERT. EXAM ||
MOST RECENT EXAM 2026-2027 ACTUAL COMPLETE
REAL EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCES!! BRAND NEW EXAM!!
JUST RELEASED.
A motor vehicle originally equipped with a catalytic converter
will be rejected if
the catalytic converter has been removed or disconnected
beginning with year
model - ANSWER-
1984
When checking operation of the headlamps, a vehicle will be
rejected if: - ANSWER-Physical damage would obviously cause
a handlamp beam to fail to sufficiently illuminate the roadway
ahead of the vehicle
A license plate lamp must be white in color and rejected for: -
ANSWER-Mounting, Shoddy wiring, Lamp lens is broken or
does not fit properly(All of the above)
Mirrors would be rejected if: - ANSWER-Reflecting surface is
cracked, peeled, or tarnished, mirror interferes with driver's
forward vision, mirror does not afford a clear view to the
rear(Any of the above)
, What color tail lamps are required to pass inspection? -
ANSWER-Red
The wiper blade should be rejected if the portion of the rubber
element that contacts the windshield is torn on one end or both
ends combined, more than - ANSWER-1 inch
A tailpipe failing to discharge exhaust from the rear, sides, or
top of the passenger compartment of the vehicle would pass
inspection(T/F) – ANSWER-False
A center high mount stop lamp must provide a steady-
burning red light when
brakes are applied.(T/F) -
ANSWER-True
When visually inspecting a CNG system, a letter of
documentation is not
acceptable if the label cannot be found(T/F) -
ANSWER-False
A center mount stop lamp(CHMSL) is required on a 1986 and
newer model
passenger car. (T/F) -
ANSWER-True
The parking brake is inspected and rejected if: - ANSWER-
Operating mechanism, when fully applied, does not hold
MOST RECENT EXAM 2026-2027 ACTUAL COMPLETE
REAL EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCES!! BRAND NEW EXAM!!
JUST RELEASED.
A motor vehicle originally equipped with a catalytic converter
will be rejected if
the catalytic converter has been removed or disconnected
beginning with year
model - ANSWER-
1984
When checking operation of the headlamps, a vehicle will be
rejected if: - ANSWER-Physical damage would obviously cause
a handlamp beam to fail to sufficiently illuminate the roadway
ahead of the vehicle
A license plate lamp must be white in color and rejected for: -
ANSWER-Mounting, Shoddy wiring, Lamp lens is broken or
does not fit properly(All of the above)
Mirrors would be rejected if: - ANSWER-Reflecting surface is
cracked, peeled, or tarnished, mirror interferes with driver's
forward vision, mirror does not afford a clear view to the
rear(Any of the above)
, What color tail lamps are required to pass inspection? -
ANSWER-Red
The wiper blade should be rejected if the portion of the rubber
element that contacts the windshield is torn on one end or both
ends combined, more than - ANSWER-1 inch
A tailpipe failing to discharge exhaust from the rear, sides, or
top of the passenger compartment of the vehicle would pass
inspection(T/F) – ANSWER-False
A center high mount stop lamp must provide a steady-
burning red light when
brakes are applied.(T/F) -
ANSWER-True
When visually inspecting a CNG system, a letter of
documentation is not
acceptable if the label cannot be found(T/F) -
ANSWER-False
A center mount stop lamp(CHMSL) is required on a 1986 and
newer model
passenger car. (T/F) -
ANSWER-True
The parking brake is inspected and rejected if: - ANSWER-
Operating mechanism, when fully applied, does not hold
