Roof Layout & Measurements WGU Fast-
Track Framework: OA Scenario Analysis, PA
Submission Strategy, Competency
Prioritization & High-Impact Study Method
(2026–2027)
Description
The WGU Fast-Track Framework is a comprehensive and
strategically designed study resource created for students
at Western Governors University (WGU) who want to
progress through their courses with speed, clarity, and
confidence. Built around WGU’s competency-based
education model, this guide focuses on helping you
identify exactly what is required to pass and how to
approach assessments in the most efficient way possible.
Unlike traditional study materials that often lead to
overstudying and confusion, this framework is designed
to help you prioritize, apply, and execute. It provides a
clear system that allows you to focus on high-impact
areas, understand assessment expectations, and perform
,effectively in both Objective Assessments (OA) and
Performance Assessments (PA).
1. The highest horizontal line on a roof is called the:
A. Eave
B. Valley
C. Ridge
D. Rake
2. A valley is formed where:
A. Two ridges meet
B. Two slopes meet internally
C. Two walls meet
D. Roof meets wall
3. Roof pitch is defined as:
A. Height only
B. Width only
C. Rise over run
D. Area
4. A 6:12 pitch means:
A. 6 inches run per 12 rise
B. 6 inches rise per 12 run
C. 12 inches rise per 6 run
D. Flat roof
5. The lower edge of a roof is called:
A. Ridge
B. Hip
C. Eave
D. Valley
6. The sloped edge on a gable is:
A. Ridge
B. Rake
, C. Valley
D. Eave
7. A hip is:
A. Internal angle
B. External angle where slopes meet
C. Flat section
D. Vertical wall
8. Roof slope affects:
A. Paint color
B. Drainage
C. Wall thickness
D. Flooring
9. A flat roof typically has pitch:
A. 0:12 to 2:12
B. 6:12
C. 12:12
D. 10:12
10. Roofing area is usually measured in:
A. Cubic feet
B. Squares
C. Liters
D. Tons
11. One roofing square equals:
A. 10 sq ft
B. 50 sq ft
C. 100 sq ft
D. 200 sq ft
12. A gable roof has:
A. Four slopes
B. Two slopes
C. One slope
D. No slope
Track Framework: OA Scenario Analysis, PA
Submission Strategy, Competency
Prioritization & High-Impact Study Method
(2026–2027)
Description
The WGU Fast-Track Framework is a comprehensive and
strategically designed study resource created for students
at Western Governors University (WGU) who want to
progress through their courses with speed, clarity, and
confidence. Built around WGU’s competency-based
education model, this guide focuses on helping you
identify exactly what is required to pass and how to
approach assessments in the most efficient way possible.
Unlike traditional study materials that often lead to
overstudying and confusion, this framework is designed
to help you prioritize, apply, and execute. It provides a
clear system that allows you to focus on high-impact
areas, understand assessment expectations, and perform
,effectively in both Objective Assessments (OA) and
Performance Assessments (PA).
1. The highest horizontal line on a roof is called the:
A. Eave
B. Valley
C. Ridge
D. Rake
2. A valley is formed where:
A. Two ridges meet
B. Two slopes meet internally
C. Two walls meet
D. Roof meets wall
3. Roof pitch is defined as:
A. Height only
B. Width only
C. Rise over run
D. Area
4. A 6:12 pitch means:
A. 6 inches run per 12 rise
B. 6 inches rise per 12 run
C. 12 inches rise per 6 run
D. Flat roof
5. The lower edge of a roof is called:
A. Ridge
B. Hip
C. Eave
D. Valley
6. The sloped edge on a gable is:
A. Ridge
B. Rake
, C. Valley
D. Eave
7. A hip is:
A. Internal angle
B. External angle where slopes meet
C. Flat section
D. Vertical wall
8. Roof slope affects:
A. Paint color
B. Drainage
C. Wall thickness
D. Flooring
9. A flat roof typically has pitch:
A. 0:12 to 2:12
B. 6:12
C. 12:12
D. 10:12
10. Roofing area is usually measured in:
A. Cubic feet
B. Squares
C. Liters
D. Tons
11. One roofing square equals:
A. 10 sq ft
B. 50 sq ft
C. 100 sq ft
D. 200 sq ft
12. A gable roof has:
A. Four slopes
B. Two slopes
C. One slope
D. No slope
