CSWA SOLIDWORKS CERTIFICATION
EXAM QUESTIONS AND
CORRECT ANSWERS
Which is not an available option for a line? - ✔✔✔ Correct Answer >
snap to axes
Which line type allows dimensions to be added with the creation of
the line? - ✔✔✔ Correct Answer > Angle
What method will not convert a line to a construction line? - ✔✔✔
Correct Answer > Selecting a line, clicking "Centerline" button in the
commandmanager
True or False - When a corner rectangle is sketched, two of the sides
are automatically set to horizontal and the other two are automatically
set to vertical. - ✔✔✔ Correct Answer > True
Page 1 of 18
,What type of rectangle tool adds centerlines when the sketch entity is
drawn? - ✔✔✔ Correct Answer > Center Rectangle
What rectangle tool requires more than two points to be selected in
order to draw the sketch entity? - ✔✔✔ Correct Answer >
Parallelogram
True or False - To create a "3 Point Center Rectangle", you first click
at the center point, then click at the midpoint of one edge of the
rectangle, and then click to set the height of the rectangle. - ✔✔✔
Correct Answer > True
True or False - Two identical rectangles can be created by sketching
one rectangle on top of another and then dragging it to a new position.
- ✔✔✔ Correct Answer > False
What circle tool requires clicking three points to draw the circle? -
✔✔✔ Correct Answer > Perimeter Circle
Page 2 of 18
, True or False - The center point of a Perimeter circle cannot be
selected since it is interpolated using the three selected points on the
perimeter. - ✔✔✔ Correct Answer > False
What arc tool only requires two points to be created? - ✔✔✔ Correct
Answer > Tangent Arc
True or False - The Tangent Arc is the only arc that requires existing
geometry. - ✔✔✔ Correct Answer > True
True or False - The Sketch Fillet command trims away a corner to
create a bevel in the reaming space. - ✔✔✔ Correct Answer > False
What trimming method is considered to be the most flexible trimming
method and requires the cursor to be dragged over the entities to be
erased? - ✔✔✔ Correct Answer > Power Trim
This axis of the reference triad should be clicked to change the view
normal to the Top plane - ✔✔✔ Correct Answer > Y-axis
Page 3 of 18
EXAM QUESTIONS AND
CORRECT ANSWERS
Which is not an available option for a line? - ✔✔✔ Correct Answer >
snap to axes
Which line type allows dimensions to be added with the creation of
the line? - ✔✔✔ Correct Answer > Angle
What method will not convert a line to a construction line? - ✔✔✔
Correct Answer > Selecting a line, clicking "Centerline" button in the
commandmanager
True or False - When a corner rectangle is sketched, two of the sides
are automatically set to horizontal and the other two are automatically
set to vertical. - ✔✔✔ Correct Answer > True
Page 1 of 18
,What type of rectangle tool adds centerlines when the sketch entity is
drawn? - ✔✔✔ Correct Answer > Center Rectangle
What rectangle tool requires more than two points to be selected in
order to draw the sketch entity? - ✔✔✔ Correct Answer >
Parallelogram
True or False - To create a "3 Point Center Rectangle", you first click
at the center point, then click at the midpoint of one edge of the
rectangle, and then click to set the height of the rectangle. - ✔✔✔
Correct Answer > True
True or False - Two identical rectangles can be created by sketching
one rectangle on top of another and then dragging it to a new position.
- ✔✔✔ Correct Answer > False
What circle tool requires clicking three points to draw the circle? -
✔✔✔ Correct Answer > Perimeter Circle
Page 2 of 18
, True or False - The center point of a Perimeter circle cannot be
selected since it is interpolated using the three selected points on the
perimeter. - ✔✔✔ Correct Answer > False
What arc tool only requires two points to be created? - ✔✔✔ Correct
Answer > Tangent Arc
True or False - The Tangent Arc is the only arc that requires existing
geometry. - ✔✔✔ Correct Answer > True
True or False - The Sketch Fillet command trims away a corner to
create a bevel in the reaming space. - ✔✔✔ Correct Answer > False
What trimming method is considered to be the most flexible trimming
method and requires the cursor to be dragged over the entities to be
erased? - ✔✔✔ Correct Answer > Power Trim
This axis of the reference triad should be clicked to change the view
normal to the Top plane - ✔✔✔ Correct Answer > Y-axis
Page 3 of 18
