1|Page
Kitchen Hood Fire Suppression Technician
Certification Exam ACTUAL VERIFIED EXAM
COMPLETE QUESTIONS AND CORRECT ANSWERS
LATEST UPDATE THIS YEAR.pdf||NEWEST EXAM!!!
You are working as the only in-house NACE Level 2
Inspector in a shop setting when an independent 3rd party
NACE Level 3 Inspector, representing the owner, presents
you with a copy of a Non Conformance Report (NCR) he
has written for a NACE2/SSPC SP 10 centrifugal blast
which you had previously approved.
Your FIRST preferred course of action is to:
A. Verbally challenge the NCR
B. Request a re-blast of the item in question
C. Consult your supervisor
D. Review the NCR with the other Inspector - Answer-C.
Consult your supervisor
An Inspection and Test Plan is required when:
A. It is always required
B. When the Coating Applicator requests one
C. When the Owner specifies one
,2|Page
D. When the Inspector requests one - Answer-A. It is
always required
The Inspectors' goal at the Pre-Job Conference is to:
A. Obtain a clear understanding of the Specification
B. Discuss contractual requirements
C. Manage the meeting so it doesn't go off topic
D. Take accurate meeting minutes for distribution -
Answer-A. Obtain a clear understanding of the
Specification
Coating Surveys are legally required:
A. On commercial marine vessels and offshore platforms
B. On high pressure gas lines and fireproofed structures
C. On water tanks and potable water pipelines
D. On food and beverage vessels and can linings -
Answer-A. On commercial marine vessels and offshore
platforms
You are the NACE Coating Inspector on a tank lining
project and are asked to perform a high voltage holiday
test after the coating applicators have completed their final
repairs. After meeting all the confined space entry permit
, 3|Page
you enter the tank and notice a very strong odor of
solvent.
Your first course of action should to:
A. Investigate to find the source of the odor
B. Don your air supplied respirator and continue the
testing
C. Exit the tank and immediately and report the problem to
the nearest safety supervisor
D. Exit the tank and document the incident in your daily
report - Answer-C. Exit the tank and immediately and
report the problem to the nearest safety supervisor
You are working as an inspector in a galvanizing plant for
the first time.
What are some of the hazards you need to be aware of:
A. Risk of chemical exposure
B. Risk of skin
C. Risk of acid or caustic splashes
D. a), b), and c) - Answer-D. a), b), and c)
Kitchen Hood Fire Suppression Technician
Certification Exam ACTUAL VERIFIED EXAM
COMPLETE QUESTIONS AND CORRECT ANSWERS
LATEST UPDATE THIS YEAR.pdf||NEWEST EXAM!!!
You are working as the only in-house NACE Level 2
Inspector in a shop setting when an independent 3rd party
NACE Level 3 Inspector, representing the owner, presents
you with a copy of a Non Conformance Report (NCR) he
has written for a NACE2/SSPC SP 10 centrifugal blast
which you had previously approved.
Your FIRST preferred course of action is to:
A. Verbally challenge the NCR
B. Request a re-blast of the item in question
C. Consult your supervisor
D. Review the NCR with the other Inspector - Answer-C.
Consult your supervisor
An Inspection and Test Plan is required when:
A. It is always required
B. When the Coating Applicator requests one
C. When the Owner specifies one
,2|Page
D. When the Inspector requests one - Answer-A. It is
always required
The Inspectors' goal at the Pre-Job Conference is to:
A. Obtain a clear understanding of the Specification
B. Discuss contractual requirements
C. Manage the meeting so it doesn't go off topic
D. Take accurate meeting minutes for distribution -
Answer-A. Obtain a clear understanding of the
Specification
Coating Surveys are legally required:
A. On commercial marine vessels and offshore platforms
B. On high pressure gas lines and fireproofed structures
C. On water tanks and potable water pipelines
D. On food and beverage vessels and can linings -
Answer-A. On commercial marine vessels and offshore
platforms
You are the NACE Coating Inspector on a tank lining
project and are asked to perform a high voltage holiday
test after the coating applicators have completed their final
repairs. After meeting all the confined space entry permit
, 3|Page
you enter the tank and notice a very strong odor of
solvent.
Your first course of action should to:
A. Investigate to find the source of the odor
B. Don your air supplied respirator and continue the
testing
C. Exit the tank and immediately and report the problem to
the nearest safety supervisor
D. Exit the tank and document the incident in your daily
report - Answer-C. Exit the tank and immediately and
report the problem to the nearest safety supervisor
You are working as an inspector in a galvanizing plant for
the first time.
What are some of the hazards you need to be aware of:
A. Risk of chemical exposure
B. Risk of skin
C. Risk of acid or caustic splashes
D. a), b), and c) - Answer-D. a), b), and c)
