AMR DRIVER PERFOMANCE EVALUATION EXAM
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) Q&A 2026 |INSTANT DOWNLOAD PDF
1. What is the primary responsibility of an AMR driver during
patient transport?
A. Arriving at the destination as fast as possible
B. Ensuring safe, smooth, and timely transport of the patient
C. Using sirens continuously
D. Following other emergency vehicles closely
Rationale: Patient safety and stability take priority over speed.
Correct Answer: B
2. When approaching an intersection in an emergency vehicle,
the driver should:
A. Maintain speed if siren is on
B. Slow down, scan all directions, and proceed only when safe
C. Honk continuously and proceed
D. Follow other vehicles through
Rationale: Intersections are high-risk collision points.
Correct Answer: B
,3. What is the safest following distance for an ambulance in
normal conditions?
A. 1 second
B. 2–3 seconds
C. 5–6 seconds
D. No distance required
Rationale: A safe buffer allows reaction time.
Correct Answer: B
4. The use of lights and sirens should be based on:
A. Driver preference
B. Traffic conditions only
C. Agency policy and patient condition
D. Road type
Rationale: Emergency response use is regulated and policy-
driven.
Correct Answer: C
5. What should a driver do before reversing an ambulance?
A. Reverse immediately
B. Honk and reverse slowly
C. Conduct a full 360-degree walk-around or camera check
D. Ask the passenger to guide without checking surroundings
,Rationale: Prevents backing collisions and blind spot accidents.
Correct Answer: C
6. The most important factor in safe driving is:
A. Vehicle speed
B. Road type
C. Situational awareness
D. Siren usage
Rationale: Awareness prevents most collisions.
Correct Answer: C
7. Hydroplaning occurs when:
A. Tires overheat
B. Water builds between tires and road surface
C. Engine fails
D. Brakes lock
Rationale: Loss of traction on wet roads.
Correct Answer: B
8. What should you do if an ambulance begins to skid?
A. Brake hard
B. Turn sharply
, C. Steer in the direction of the skid and ease off acceleration
D. Accelerate quickly
Rationale: Controlled steering restores traction.
Correct Answer: C
9. When responding in traffic, an AMR driver should always
assume that:
A. Other drivers can hear sirens
B. Other drivers will yield properly
C. Other drivers may not see or hear the ambulance
D. Traffic will clear automatically
Rationale: Defensive driving reduces risk.
Correct Answer: C
10. What is the best action when fatigue is noticed during
driving?
A. Increase speed
B. Stop driving and rest or change drivers
C. Open windows and continue
D. Drink energy drinks and continue
Rationale: Fatigue impairs judgment and reaction time.
Correct Answer: B
QUESTIONS AND CORRECT ANSWERS (VERIFIED
ANSWERS) Q&A 2026 |INSTANT DOWNLOAD PDF
1. What is the primary responsibility of an AMR driver during
patient transport?
A. Arriving at the destination as fast as possible
B. Ensuring safe, smooth, and timely transport of the patient
C. Using sirens continuously
D. Following other emergency vehicles closely
Rationale: Patient safety and stability take priority over speed.
Correct Answer: B
2. When approaching an intersection in an emergency vehicle,
the driver should:
A. Maintain speed if siren is on
B. Slow down, scan all directions, and proceed only when safe
C. Honk continuously and proceed
D. Follow other vehicles through
Rationale: Intersections are high-risk collision points.
Correct Answer: B
,3. What is the safest following distance for an ambulance in
normal conditions?
A. 1 second
B. 2–3 seconds
C. 5–6 seconds
D. No distance required
Rationale: A safe buffer allows reaction time.
Correct Answer: B
4. The use of lights and sirens should be based on:
A. Driver preference
B. Traffic conditions only
C. Agency policy and patient condition
D. Road type
Rationale: Emergency response use is regulated and policy-
driven.
Correct Answer: C
5. What should a driver do before reversing an ambulance?
A. Reverse immediately
B. Honk and reverse slowly
C. Conduct a full 360-degree walk-around or camera check
D. Ask the passenger to guide without checking surroundings
,Rationale: Prevents backing collisions and blind spot accidents.
Correct Answer: C
6. The most important factor in safe driving is:
A. Vehicle speed
B. Road type
C. Situational awareness
D. Siren usage
Rationale: Awareness prevents most collisions.
Correct Answer: C
7. Hydroplaning occurs when:
A. Tires overheat
B. Water builds between tires and road surface
C. Engine fails
D. Brakes lock
Rationale: Loss of traction on wet roads.
Correct Answer: B
8. What should you do if an ambulance begins to skid?
A. Brake hard
B. Turn sharply
, C. Steer in the direction of the skid and ease off acceleration
D. Accelerate quickly
Rationale: Controlled steering restores traction.
Correct Answer: C
9. When responding in traffic, an AMR driver should always
assume that:
A. Other drivers can hear sirens
B. Other drivers will yield properly
C. Other drivers may not see or hear the ambulance
D. Traffic will clear automatically
Rationale: Defensive driving reduces risk.
Correct Answer: C
10. What is the best action when fatigue is noticed during
driving?
A. Increase speed
B. Stop driving and rest or change drivers
C. Open windows and continue
D. Drink energy drinks and continue
Rationale: Fatigue impairs judgment and reaction time.
Correct Answer: B
