ARDMS SPI LATEST 2026 EXAM WITH QUESTIONS AND WELL VERIFIED ANSWERS!!ARDMS REAL EXAM 2026 [ALREADY GRADED A+]

ARDMS SPI LATEST 2026 EXAM WITH
QUESTIONS AND WELL VERIFIED
ANSWERS!!ARDMS REAL EXAM 2026
[ALREADY GRADED A+]




A strongly focused transducer implies a:
a. short focal length; decreased beam divergence
b. medium focal length; increased beam divergence
c. long focal length; no beam divergenc
d. short focal length; increased beam divergence - ANSWER-d. short focal
length; increased beam divergence


B-mode displays reflector:
a. amplitude and distance
b. amplitude and velocity
c. power and direction
d. depth and speed - ANSWER-a. amplitude and distance

, An increase in the number of pixels on the display will improve: -
ANSWER-detail resolution


Propagation speed is determined by:
a. frequency
b. harmonics
c. bandwidth
d. bulk modulus - ANSWER-d. bulk modulus


Increasing transmit gain increases everything except: - ANSWER-
frequency


The correct depth placement of reflectors depends primarily upon:
a. frequency
b. period
c. power
d. propagation speed - ANSWER-d. propagation speed


Which of the following will increase the color flow jet area displayed?
a. increase color gain
b. increase velocity scale
c. increase frequency - ANSWER-a. increase color gain


Increasing propagation speed: - ANSWER-air, soft tissue, bone

The most common type of transducer used in echo is: - ANSWER-sector
phased array


Decibels are the units for all of the following except:
a. amplitude
b. transmit gain
c. gain
d. attenuation
e. TGC
f. dynamic range
e. intensity - ANSWER-e. intensity= mW/cm2