IDENTITY SECURITY ESSENTIALS
WATCHGUARD TEST PAPER 2026
COMPLETE QUESTIONS AND
VERIFIED ANSWERS GRADED A+
◉ Any-optional
Optional-1
Any . Answer: ***In the network configuration in this image, which
aliases is Eth2 a member of? (Select three.)
A. Any-optional
B. Any-External
C. Optional-1
D. Any
E. Any-Trusted
◉ ***When your device is in a default state, to which interface do you
connect your management computer so you can use the Quick Setup
Wizard or Web SetupWizard to configure the device? (Select one.)
A. Interface 0
B. Console interface
C. Any interface
D. Interface 1 . Answer: Interface 1
,◉ ***In the default Firebox configuration file, which policies control
management access to the device? (Select two.)
A. WatchGuard
B. FTP
C. Ping
D. WatchGuard Web UI
E. Outgoing . Answer: WatchGuard
WatchGuard Web UI
◉ To use the Web Setup Wizard or Quick Setup Wizard to configure
your Firebox or XTM device, your computer must have an IP address on
which subnet? (Select one.)
A. 10.0.10.0/24
B. 10.0.1.0/24
C. 172.16.10.0/24
D. 192.168.1.0/24 . Answer: 10.0.1.0/24
◉ ***What is the best method to downgrade the version of Fireware
OS on your Firebox without losing all device configuration settings?
(Select one.)
,A. Restore a saved backup image that was created for the device before
the last Fireware OS upgrade.
B. Use the Upgrade OS feature in Fireware Web UI to install the sysa_dl
file for an order version of Fireware OS.
C. Change the OS compatibility setting in Policy Manager to downgrade
the device. Then use Policy Manager to save the configuration to the
device.
D. Use the downgrade feature on Policy Manager to select a previous of
Fireware OS. . Answer: Restore a saved backup image that was created
for the device before the last Fireware OS upgrade.
◉ ***You configured four Device Administrator user accounts for your
Firebox. To see a report of which Device Management users have made
changes to the device configuration, what must you do? (Select two.)
A. Start Firebox System Manager for the device and review the activity
for the Management Users on the Authentication List tab.
B. Connect to Report Manager or Dimension and view the Audit Trail
report for your device.
C. Open WatchGuard Server Center and review the configuration
history for managed devices.
D. Configure your device to send audit trail log messages to your
WatchGuard Log Server or Dimension Log Server. . Answer: Connect to
Report Manager or Dimension and view the Audit Trail report for your
device.
, Open WatchGuard Server Center and review the configuration history
for managed devices.
◉ ***Which items are included in a Firebox backup image file? (Select
four.)
A. Support snapshot
B. Fireware OS
C. Configuration file
D. Log file
E. Feature keys
F. Certificates
G. Passwords
This question was on the exam but it had different answers.
One of the answer options was policies. I don't believe feature keys was
on there. Also users and roles were on there. . Answer: Configuration
file
Certificates
Passwords
Feature key
WATCHGUARD TEST PAPER 2026
COMPLETE QUESTIONS AND
VERIFIED ANSWERS GRADED A+
◉ Any-optional
Optional-1
Any . Answer: ***In the network configuration in this image, which
aliases is Eth2 a member of? (Select three.)
A. Any-optional
B. Any-External
C. Optional-1
D. Any
E. Any-Trusted
◉ ***When your device is in a default state, to which interface do you
connect your management computer so you can use the Quick Setup
Wizard or Web SetupWizard to configure the device? (Select one.)
A. Interface 0
B. Console interface
C. Any interface
D. Interface 1 . Answer: Interface 1
,◉ ***In the default Firebox configuration file, which policies control
management access to the device? (Select two.)
A. WatchGuard
B. FTP
C. Ping
D. WatchGuard Web UI
E. Outgoing . Answer: WatchGuard
WatchGuard Web UI
◉ To use the Web Setup Wizard or Quick Setup Wizard to configure
your Firebox or XTM device, your computer must have an IP address on
which subnet? (Select one.)
A. 10.0.10.0/24
B. 10.0.1.0/24
C. 172.16.10.0/24
D. 192.168.1.0/24 . Answer: 10.0.1.0/24
◉ ***What is the best method to downgrade the version of Fireware
OS on your Firebox without losing all device configuration settings?
(Select one.)
,A. Restore a saved backup image that was created for the device before
the last Fireware OS upgrade.
B. Use the Upgrade OS feature in Fireware Web UI to install the sysa_dl
file for an order version of Fireware OS.
C. Change the OS compatibility setting in Policy Manager to downgrade
the device. Then use Policy Manager to save the configuration to the
device.
D. Use the downgrade feature on Policy Manager to select a previous of
Fireware OS. . Answer: Restore a saved backup image that was created
for the device before the last Fireware OS upgrade.
◉ ***You configured four Device Administrator user accounts for your
Firebox. To see a report of which Device Management users have made
changes to the device configuration, what must you do? (Select two.)
A. Start Firebox System Manager for the device and review the activity
for the Management Users on the Authentication List tab.
B. Connect to Report Manager or Dimension and view the Audit Trail
report for your device.
C. Open WatchGuard Server Center and review the configuration
history for managed devices.
D. Configure your device to send audit trail log messages to your
WatchGuard Log Server or Dimension Log Server. . Answer: Connect to
Report Manager or Dimension and view the Audit Trail report for your
device.
, Open WatchGuard Server Center and review the configuration history
for managed devices.
◉ ***Which items are included in a Firebox backup image file? (Select
four.)
A. Support snapshot
B. Fireware OS
C. Configuration file
D. Log file
E. Feature keys
F. Certificates
G. Passwords
This question was on the exam but it had different answers.
One of the answer options was policies. I don't believe feature keys was
on there. Also users and roles were on there. . Answer: Configuration
file
Certificates
Passwords
Feature key
