Using the Steam Tables, determine the amount of cooling water needed by a condenser in kg/sec if wet steam comes into the condenser at P= 610.44mmHG vac and 99.47 % moisture , mass flow rate = 7205 kg/hr. Cooling water enters the condenser at 12 deg C and

downloaded from




Scholarfriends


Using the Steam Tables, determine the amount of cooling
water needed by a condenser in kg/sec if wet steam comes into
the condenser at P= 610.44mmHG vac and 99.47 % moisture ,
mass flow rate = 7205 kg/hr. Cooling water enters the
condenser at 12 deg C and leaves at 21 deg C.




https://scholarfriends.com




Downloaded by: | https://scholarfriends.com/singlePaper/623409/using-the-steam-tables-determine-the-
amount-of-cooling-water-needed-by-a-condenser-in-kgsec-if-wet
Distribution of this document is illegal.

, 1. A. Using the Steam Tables, determine the amount of cooling water needed by a
condenser in kg/sec if wet steam comes into the condenser at P= 610.44mmHG vac
and 99.47 % moisture , mass flow rate = 7205 kg/hr. Cooling water enters the
condenser at 12 deg C and leaves at 21 deg C. Answer: B. Draw the schematic
diagram of the condenser and process in the PV and TS diagrams below. Cp H20 =
4.187 KJ/(kg-K): Schematic diagram of heat exchanger =condenser V S 2. Use only
the MD below to solve this Item; use it by plotting data and process to determine
items being asked. Steam enters a turbine at 117.4308 atmgage and 932 deg. F, and
expands isentropicaly to 177.17 inches of Hg. For 7 kg/sec of steam, what is (a) the

Downloaded from Scholarfriends.com