IDIS 403 CH 8 | QUESTIONS AND ANSWERS | 2026
UPDATE | WITH COMPLETE SOLUTION
Gear Motor types include external gear, internal gear and _____ Answer - a.
capacitor start
b. gerotor
c. piston
d. vane
b. gerotor
Well-fitted O-rings are compressed about _____ % when installed in the groove
between the inside of the cylinder barrel and the piston Answer - a. 10
b. 15
c. 20
d. 25
a. 10%
A ____ cylinder consists of two or more cylinders where the rods are not
connected Answer - a. double-rod
b. duplex
c. telescoping ram
d. tandem
, b. duplex
A(n) ______ is a line or passage from the cam ring area of a hydraulic device
that carries hydraulic fluid leakage from the device to a low-pressure reservoir
Answer - a. case drain
b. external drain line
c. outlet port
d. pilot line
a. case drain
_____ torque is the torque required to get a nonmoving load to begin moving
Answer - a. breakaway
b. mechanical
c. running
d. starting
a. breakaway
Polytetrafluorethylene is also known as _______ Answer - a. NBR
b. Teflon
c. torlon
d. viton
b. teflon
UPDATE | WITH COMPLETE SOLUTION
Gear Motor types include external gear, internal gear and _____ Answer - a.
capacitor start
b. gerotor
c. piston
d. vane
b. gerotor
Well-fitted O-rings are compressed about _____ % when installed in the groove
between the inside of the cylinder barrel and the piston Answer - a. 10
b. 15
c. 20
d. 25
a. 10%
A ____ cylinder consists of two or more cylinders where the rods are not
connected Answer - a. double-rod
b. duplex
c. telescoping ram
d. tandem
, b. duplex
A(n) ______ is a line or passage from the cam ring area of a hydraulic device
that carries hydraulic fluid leakage from the device to a low-pressure reservoir
Answer - a. case drain
b. external drain line
c. outlet port
d. pilot line
a. case drain
_____ torque is the torque required to get a nonmoving load to begin moving
Answer - a. breakaway
b. mechanical
c. running
d. starting
a. breakaway
Polytetrafluorethylene is also known as _______ Answer - a. NBR
b. Teflon
c. torlon
d. viton
b. teflon