1|Page
IRONWORKER NCCER EXAM ||VERIFIED EXAM!!||
MOST RECENT EXAM ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! | NEWEST EXAM!!!
IN WHAT DRAWING WOULD ONE FIND THE CORRECT
BOLT SIZE FOR A BEAM BEING BOLTED? - Answer-
DETAIL DRAWING
WHAT SHOULD ALWAYS BE USED TO IGNITE A
CUTTING TORCH? - Answer-STRIKER
EQUILIZING THE WEIGHT OF THE LOAD AT VARIOUS
LIFTING POINTS IS CALLED: - Answer-
CONFIGURATION
A COMBINATION SQUARE WITHOUT A PROTRACTOR
HEAD IS USED TO LAYOUT: - Answer-45 DEGREE
LINES
,2|Page
PRIOR TO INSPECTION IT IS GOOD PRACTICE TO
TEST ALL STUDS WITH WHAT METHOD? - Answer-
PING TEST
WHERE IS THE FULCRUM OR PIVOT POINT ON A
FORKLIFT? - Answer-THE FRONT AXLE
A DOCUMENT THAT OUTLINES WEIGHTS,CRANE
CONFIGURATION AND RIGGING REQUIREMENTS FOR
A LIFT IS CALLED AN: - Answer-LIFT PLAN
WHERE CAN THE BOLTING METHODS REGARDING
STRUCTURAL STEEL USUALLY BE FOUND ? - Answer-
IN THE GENERAL NOTES OF THE STRUCTURAL
DRAWINGS
WHEN ESTABLISHING ELEVATIONS OF STRUCTURAL
STEEL MEMBERS, THE REFERENCE POINT USED TO
DETERMINE ALL OTHER ELEVATIONS IS CALLED? -
Answer-THE BENCHMARK
, 3|Page
WHAT IS THE SURFACE AREA OF A RECTANGLE WITH
THE DIMENSIONS OF 30'6" TALL AND 6 FEET WIDE? -
Answer-183FT
ASSUMING A GRIP DISTANCE OF 1", WHAT IS THE
MINIMUN LENGTH OF THE BOLT REQUIRED FOR A
3/4" DIAMETER BOLT? - Answer-2 1/4"
THE LOCATION OF BRIDGING DEPENDS ON THE
LENGTH OF THE: - Answer-SPAN
BEFORE BUNDLES OF DECK CAN BE LANDED ON A
BAR JOIST, WHAT ACTION MUST BE COMPLETED? -
Answer-JOIST MUST HAVE BRIDGING INSTALLED
WHEN MATERIALS ARE BEING HOISTED TO AN
UPPER LEVEL, A TAG LINE IS USED TO: - Answer-HELP
CONTROL THE LOAD
ITEMS SUCH AS FIELD WELDING INSTRUCTIONS,
HANGERS, AND CONNECTION DETAILS ARE
GENERALLY FOUND ON: - Answer-THE DETAIL
DRAWINGS
IRONWORKER NCCER EXAM ||VERIFIED EXAM!!||
MOST RECENT EXAM ACTUAL COMPLETE REAL
EXAM QUESTIONS AND CORRECT ANSWERS
(VERIFIED ANSWERS) ALREADY GRADED A+ |
GUARANTEED SUCCESS!! | NEWEST EXAM!!!
IN WHAT DRAWING WOULD ONE FIND THE CORRECT
BOLT SIZE FOR A BEAM BEING BOLTED? - Answer-
DETAIL DRAWING
WHAT SHOULD ALWAYS BE USED TO IGNITE A
CUTTING TORCH? - Answer-STRIKER
EQUILIZING THE WEIGHT OF THE LOAD AT VARIOUS
LIFTING POINTS IS CALLED: - Answer-
CONFIGURATION
A COMBINATION SQUARE WITHOUT A PROTRACTOR
HEAD IS USED TO LAYOUT: - Answer-45 DEGREE
LINES
,2|Page
PRIOR TO INSPECTION IT IS GOOD PRACTICE TO
TEST ALL STUDS WITH WHAT METHOD? - Answer-
PING TEST
WHERE IS THE FULCRUM OR PIVOT POINT ON A
FORKLIFT? - Answer-THE FRONT AXLE
A DOCUMENT THAT OUTLINES WEIGHTS,CRANE
CONFIGURATION AND RIGGING REQUIREMENTS FOR
A LIFT IS CALLED AN: - Answer-LIFT PLAN
WHERE CAN THE BOLTING METHODS REGARDING
STRUCTURAL STEEL USUALLY BE FOUND ? - Answer-
IN THE GENERAL NOTES OF THE STRUCTURAL
DRAWINGS
WHEN ESTABLISHING ELEVATIONS OF STRUCTURAL
STEEL MEMBERS, THE REFERENCE POINT USED TO
DETERMINE ALL OTHER ELEVATIONS IS CALLED? -
Answer-THE BENCHMARK
, 3|Page
WHAT IS THE SURFACE AREA OF A RECTANGLE WITH
THE DIMENSIONS OF 30'6" TALL AND 6 FEET WIDE? -
Answer-183FT
ASSUMING A GRIP DISTANCE OF 1", WHAT IS THE
MINIMUN LENGTH OF THE BOLT REQUIRED FOR A
3/4" DIAMETER BOLT? - Answer-2 1/4"
THE LOCATION OF BRIDGING DEPENDS ON THE
LENGTH OF THE: - Answer-SPAN
BEFORE BUNDLES OF DECK CAN BE LANDED ON A
BAR JOIST, WHAT ACTION MUST BE COMPLETED? -
Answer-JOIST MUST HAVE BRIDGING INSTALLED
WHEN MATERIALS ARE BEING HOISTED TO AN
UPPER LEVEL, A TAG LINE IS USED TO: - Answer-HELP
CONTROL THE LOAD
ITEMS SUCH AS FIELD WELDING INSTRUCTIONS,
HANGERS, AND CONNECTION DETAILS ARE
GENERALLY FOUND ON: - Answer-THE DETAIL
DRAWINGS
