Vermont Commercial Pesticide
Applicator Core Examination Practice
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. Which federal agency regulates pesticide labeling and sale in the
United States?
A. U.S. Forest Service
B. U.S. Environmental Protection Agency
C. U.S. Department of Agriculture
D. Occupational Safety and Health Administration
B. U.S. Environmental Protection Agency
The EPA regulates pesticides under the Federal Insecticide, Fungicide,
and Rodenticide Act (FIFRA) to ensure safety and proper labeling.
,2. What information is required on a pesticide label?
A. Manufacturer contact information
B. Active ingredient and percentage
C. Directions for use and safety precautions
D. All of the above
D. All of the above
Pesticide labels must include manufacturer details, active
ingredients, usage directions, and safety information to comply with
federal and state regulations.
3. The signal word "Danger" on a pesticide label indicates:
A. Low toxicity
B. Moderate toxicity
C. High toxicity
D. No toxicity
C. High toxicity
Signal words indicate acute toxicity: "Danger" signifies the highest
level of hazard, requiring strict precautions.
4. Which of the following is a personal protective equipment (PPE)
requirement for mixing a highly toxic pesticide?
A. Safety glasses only
B. Waterproof gloves, respirator, and protective clothing
, C. Hearing protection only
D. Dust mask only
B. Waterproof gloves, respirator, and protective clothing
High-toxicity pesticides require comprehensive PPE to prevent skin
contact, inhalation, and eye exposure.
5. The main route of pesticide exposure for most applicators is:
A. Inhalation
B. Dermal absorption
C. Ingestion
D. Ocular absorption
B. Dermal absorption
Skin contact accounts for the majority of pesticide exposures,
emphasizing the importance of protective clothing and gloves.
6. Which is the most important first step in handling a pesticide spill?
A. Call the manufacturer
B. Evacuate the area if needed and prevent further contamination
C. Mix with another chemical to neutralize
D. Apply water to dilute the spill
B. Evacuate the area if needed and prevent further contamination
Safety and containment are the priority to prevent exposure to
people and the environment.
, 7. What is the main purpose of the pesticide label directions?
A. To provide marketing information
B. To ensure effective and safe use
C. To describe competitor products
D. To list unrelated chemicals
B. To ensure effective and safe use
Directions provide critical information to maximize pest control
efficacy while minimizing risks.
8. Which class of pesticides primarily targets insects?
A. Herbicides
B. Insecticides
C. Fungicides
D. Rodenticides
B. Insecticides
Insecticides are formulated to control or eliminate insect pests.
9. A pesticide applicator notices that a product label is torn and partially
unreadable. What should they do?
A. Use the pesticide anyway
B. Replace the label with hand-written notes
Applicator Core Examination Practice
Questions And Correct Answers
(Verified Answers) Plus Rationales 2026
Q&A | Instant Download Pdf
1. Which federal agency regulates pesticide labeling and sale in the
United States?
A. U.S. Forest Service
B. U.S. Environmental Protection Agency
C. U.S. Department of Agriculture
D. Occupational Safety and Health Administration
B. U.S. Environmental Protection Agency
The EPA regulates pesticides under the Federal Insecticide, Fungicide,
and Rodenticide Act (FIFRA) to ensure safety and proper labeling.
,2. What information is required on a pesticide label?
A. Manufacturer contact information
B. Active ingredient and percentage
C. Directions for use and safety precautions
D. All of the above
D. All of the above
Pesticide labels must include manufacturer details, active
ingredients, usage directions, and safety information to comply with
federal and state regulations.
3. The signal word "Danger" on a pesticide label indicates:
A. Low toxicity
B. Moderate toxicity
C. High toxicity
D. No toxicity
C. High toxicity
Signal words indicate acute toxicity: "Danger" signifies the highest
level of hazard, requiring strict precautions.
4. Which of the following is a personal protective equipment (PPE)
requirement for mixing a highly toxic pesticide?
A. Safety glasses only
B. Waterproof gloves, respirator, and protective clothing
, C. Hearing protection only
D. Dust mask only
B. Waterproof gloves, respirator, and protective clothing
High-toxicity pesticides require comprehensive PPE to prevent skin
contact, inhalation, and eye exposure.
5. The main route of pesticide exposure for most applicators is:
A. Inhalation
B. Dermal absorption
C. Ingestion
D. Ocular absorption
B. Dermal absorption
Skin contact accounts for the majority of pesticide exposures,
emphasizing the importance of protective clothing and gloves.
6. Which is the most important first step in handling a pesticide spill?
A. Call the manufacturer
B. Evacuate the area if needed and prevent further contamination
C. Mix with another chemical to neutralize
D. Apply water to dilute the spill
B. Evacuate the area if needed and prevent further contamination
Safety and containment are the priority to prevent exposure to
people and the environment.
, 7. What is the main purpose of the pesticide label directions?
A. To provide marketing information
B. To ensure effective and safe use
C. To describe competitor products
D. To list unrelated chemicals
B. To ensure effective and safe use
Directions provide critical information to maximize pest control
efficacy while minimizing risks.
8. Which class of pesticides primarily targets insects?
A. Herbicides
B. Insecticides
C. Fungicides
D. Rodenticides
B. Insecticides
Insecticides are formulated to control or eliminate insect pests.
9. A pesticide applicator notices that a product label is torn and partially
unreadable. What should they do?
A. Use the pesticide anyway
B. Replace the label with hand-written notes
