Connecticut Commercial Pesticide Applicator
Certification Category 7 Industrial,
Institutional, Structural Pest Control
Examination Questions And Correct Answers
(Verified Answers) Plus Rationales 2026 Q&A |
Instant Download Pdf
1. Which pest is most commonly associated with stored product
infestations in grain mills?
A. Ants
B. Beetles
C. Bees
D. Butterflies
Beetles, such as the rice weevil and grain beetles, are common
stored product pests in grain facilities due to their life cycle
aligning with stored grains.
2. What is the primary purpose of an exclusion method in structural
pest control?
, A. To fog with pesticides
B. To attract pests
C. To prevent pest entry
D. To provide food sources to pests
Exclusion physically blocks pests from entering structures, which is
a key component of integrated pest management.
3. What does IPM stand for?
A. Internal Pest Management
B. Insect Prevention Method
C. Integrated Pest Management
D. Insect Pest Monitoring
Integrated Pest Management (IPM) is a sustainable approach
combining multiple tools to manage pest populations.
4. Which of the following is a cockroach species commonly found in
kitchens?
A. Carpenter cockroach
B. German cockroach
C. American locust
D. Fire ant
German cockroaches thrive in kitchens and food preparation areas
due to warmth and food availability.
,5. What is the purpose of conducting a site inspection before
pesticide application?
A. To estimate profit
B. To identify pest problems and conducive conditions
C. To advertise services
D. To train staff
Site inspections determine pest species present, favorable
conditions, and necessary control measures.
6. Which rodent is known for climbing and nesting in buildings?
A. Deer mouse
B. Vole
C. Roof rat
D. Pocket gopher
Roof rats climb well and often nest in attic spaces or rafters of
structures.
7. What is the minimum PPE requirement when mixing concentrated
pesticides?
A. Long sleeves only
B. No PPE needed
C. Chemical-resistant gloves and eye protection
D. Sandals and shorts
, Chemical-resistant gloves and eye protection protect applicators
from exposure to concentrated formulations.
8. What is a GFCI used for on pest control equipment?
A. To cool the sprayer
B. To prevent electrical shock
C. To increase pressure
D. To mix pesticides
Ground Fault Circuit Interrupters (GFCIs) reduce risk of shock when
using electrical equipment near moisture.
9. What is the best method to control bed bugs?
A. Only traps
B. Multiple control methods including heat, pesticides, and
monitoring
C. Broadcast insecticides outside
D. Lighting removal
Bed bugs often require a combination of methods for effective
control, especially heat treatments.
10. What factor most influences pesticide selection for ants?
A. Size of applicator
B. Color of pesticide
C. Behavior and biology of ant species
Certification Category 7 Industrial,
Institutional, Structural Pest Control
Examination Questions And Correct Answers
(Verified Answers) Plus Rationales 2026 Q&A |
Instant Download Pdf
1. Which pest is most commonly associated with stored product
infestations in grain mills?
A. Ants
B. Beetles
C. Bees
D. Butterflies
Beetles, such as the rice weevil and grain beetles, are common
stored product pests in grain facilities due to their life cycle
aligning with stored grains.
2. What is the primary purpose of an exclusion method in structural
pest control?
, A. To fog with pesticides
B. To attract pests
C. To prevent pest entry
D. To provide food sources to pests
Exclusion physically blocks pests from entering structures, which is
a key component of integrated pest management.
3. What does IPM stand for?
A. Internal Pest Management
B. Insect Prevention Method
C. Integrated Pest Management
D. Insect Pest Monitoring
Integrated Pest Management (IPM) is a sustainable approach
combining multiple tools to manage pest populations.
4. Which of the following is a cockroach species commonly found in
kitchens?
A. Carpenter cockroach
B. German cockroach
C. American locust
D. Fire ant
German cockroaches thrive in kitchens and food preparation areas
due to warmth and food availability.
,5. What is the purpose of conducting a site inspection before
pesticide application?
A. To estimate profit
B. To identify pest problems and conducive conditions
C. To advertise services
D. To train staff
Site inspections determine pest species present, favorable
conditions, and necessary control measures.
6. Which rodent is known for climbing and nesting in buildings?
A. Deer mouse
B. Vole
C. Roof rat
D. Pocket gopher
Roof rats climb well and often nest in attic spaces or rafters of
structures.
7. What is the minimum PPE requirement when mixing concentrated
pesticides?
A. Long sleeves only
B. No PPE needed
C. Chemical-resistant gloves and eye protection
D. Sandals and shorts
, Chemical-resistant gloves and eye protection protect applicators
from exposure to concentrated formulations.
8. What is a GFCI used for on pest control equipment?
A. To cool the sprayer
B. To prevent electrical shock
C. To increase pressure
D. To mix pesticides
Ground Fault Circuit Interrupters (GFCIs) reduce risk of shock when
using electrical equipment near moisture.
9. What is the best method to control bed bugs?
A. Only traps
B. Multiple control methods including heat, pesticides, and
monitoring
C. Broadcast insecticides outside
D. Lighting removal
Bed bugs often require a combination of methods for effective
control, especially heat treatments.
10. What factor most influences pesticide selection for ants?
A. Size of applicator
B. Color of pesticide
C. Behavior and biology of ant species
