CWB LEVEL 1 WELDING INSPECTOR EXAM
PAPER 2026 FULL QUESTIONS AND CORRECT
ANSWERS
◉ The SAW fluxes are:
A) classified on their own. They have their own separate designation.
B) not classified. Only the wire is classified.
C) classified in conjunction with the welding wire forming an
electrode/flux designation.
D) all classified with EM12K wire. Use of other wires would require
companies to perform testing to verify desired properties.. Answer: C
◉ The CSA W48 standard classes metal cored wires along with:
A) GMAW wires.
B) GTAW filler wires.
C) SAW wires.
D) FCAW wires.. Answer: D
◉ The submerged arc welding process:
A) can only be used with a constant voltage power supply.
B) can only be used with a constant current power supply.
, C) can only be used with a constant current power supply with high
frequency.
D) can be used with either a constant voltage or constant current power
supply.. Answer: D
◉ The advantage of pulsed GMAW transfer is:
A) the ability to weld gauge materials with no burn-through.
B) reduced heat input.
C) less operator skill is required.
D) increased productivity.. Answer: B
◉ What is the weld called when no filler is added while using the gas
tungsten arc welding process?
A) Surface weld
B) Automatic weld
C) Braze weld
D) Autogenous weld. Answer: D
◉ The SAW fluxes that significantly influence the composition of the
weld metal through slag/metal reactions are called:
(A) fused
.B) bonded.
C) active.
PAPER 2026 FULL QUESTIONS AND CORRECT
ANSWERS
◉ The SAW fluxes are:
A) classified on their own. They have their own separate designation.
B) not classified. Only the wire is classified.
C) classified in conjunction with the welding wire forming an
electrode/flux designation.
D) all classified with EM12K wire. Use of other wires would require
companies to perform testing to verify desired properties.. Answer: C
◉ The CSA W48 standard classes metal cored wires along with:
A) GMAW wires.
B) GTAW filler wires.
C) SAW wires.
D) FCAW wires.. Answer: D
◉ The submerged arc welding process:
A) can only be used with a constant voltage power supply.
B) can only be used with a constant current power supply.
, C) can only be used with a constant current power supply with high
frequency.
D) can be used with either a constant voltage or constant current power
supply.. Answer: D
◉ The advantage of pulsed GMAW transfer is:
A) the ability to weld gauge materials with no burn-through.
B) reduced heat input.
C) less operator skill is required.
D) increased productivity.. Answer: B
◉ What is the weld called when no filler is added while using the gas
tungsten arc welding process?
A) Surface weld
B) Automatic weld
C) Braze weld
D) Autogenous weld. Answer: D
◉ The SAW fluxes that significantly influence the composition of the
weld metal through slag/metal reactions are called:
(A) fused
.B) bonded.
C) active.
