MSHA Confined Space Safety Training
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is a confined space?
A. Any space with easy access and exit
B. A space not designed for human entry
C. A space large enough for a person to enter but with limited entry
or exit
D. Any room in a facility
Rationale: Confined spaces are defined as areas large enough for a person
to enter but have restricted entry or exit points, which can create hazards.
, 2. Which of the following is a common hazard in confined spaces?
A. Excessive noise
B. Poor lighting
C. Oxygen deficiency
D. Vibrations
Rationale: Oxygen deficiency is a primary hazard in confined spaces, which
can lead to asphyxiation.
3. Before entering a confined space, workers must:
A. Enter immediately if it looks safe
B. Conduct a hazard assessment
C. Wait for supervision only if the space is large
D. Wear gloves only
Rationale: A hazard assessment identifies risks such as toxic gases, oxygen
deficiency, and engulfment hazards.
4. What is the safe oxygen level in a confined space for entry?
A. 15–19%
B. 10–12%
C. 19.5–23.5%
D. 25–30%
,Rationale: OSHA and MSHA standards require oxygen levels between
19.5% and 23.5% for safe entry.
5. What equipment is essential for monitoring air quality in confined
spaces?
A. Pressure gauge
B. Gas detector
C. Thermometer
D. Sound meter
Rationale: Gas detectors are used to check oxygen levels and detect toxic
or flammable gases.
6. Which of the following is required before hot work in a confined
space?
A. Fire extinguisher
B. Hot work permit
C. Extra lighting
D. Protective eyewear only
Rationale: A hot work permit ensures all hazards are controlled before
activities like welding or cutting.
, 7. Which type of confined space permits are used for routine entries?
A. General permit spaces
B. Entry permit spaces
C. Emergency permits
D. No permit required
Rationale: Entry permits ensure proper authorization and verification of
hazards before routine confined space entry.
8. Who is responsible for ensuring confined space safety?
A. Only the worker
B. Only management
C. Both workers and supervisors
D. Government inspectors only
Rationale: Confined space safety is a shared responsibility between
employees and supervisors.
9. What is a “hot work” hazard?
A. Work involving heavy lifting
B. Work involving sparks or open flames
C. Work in high temperatures
D. Work near electrical outlets
Certification Exam Practice Questions
And Correct Answers (Verified Answers)
Plus Rationales 2026 Q&A | Instant
Download Pdf
1. What is a confined space?
A. Any space with easy access and exit
B. A space not designed for human entry
C. A space large enough for a person to enter but with limited entry
or exit
D. Any room in a facility
Rationale: Confined spaces are defined as areas large enough for a person
to enter but have restricted entry or exit points, which can create hazards.
, 2. Which of the following is a common hazard in confined spaces?
A. Excessive noise
B. Poor lighting
C. Oxygen deficiency
D. Vibrations
Rationale: Oxygen deficiency is a primary hazard in confined spaces, which
can lead to asphyxiation.
3. Before entering a confined space, workers must:
A. Enter immediately if it looks safe
B. Conduct a hazard assessment
C. Wait for supervision only if the space is large
D. Wear gloves only
Rationale: A hazard assessment identifies risks such as toxic gases, oxygen
deficiency, and engulfment hazards.
4. What is the safe oxygen level in a confined space for entry?
A. 15–19%
B. 10–12%
C. 19.5–23.5%
D. 25–30%
,Rationale: OSHA and MSHA standards require oxygen levels between
19.5% and 23.5% for safe entry.
5. What equipment is essential for monitoring air quality in confined
spaces?
A. Pressure gauge
B. Gas detector
C. Thermometer
D. Sound meter
Rationale: Gas detectors are used to check oxygen levels and detect toxic
or flammable gases.
6. Which of the following is required before hot work in a confined
space?
A. Fire extinguisher
B. Hot work permit
C. Extra lighting
D. Protective eyewear only
Rationale: A hot work permit ensures all hazards are controlled before
activities like welding or cutting.
, 7. Which type of confined space permits are used for routine entries?
A. General permit spaces
B. Entry permit spaces
C. Emergency permits
D. No permit required
Rationale: Entry permits ensure proper authorization and verification of
hazards before routine confined space entry.
8. Who is responsible for ensuring confined space safety?
A. Only the worker
B. Only management
C. Both workers and supervisors
D. Government inspectors only
Rationale: Confined space safety is a shared responsibility between
employees and supervisors.
9. What is a “hot work” hazard?
A. Work involving heavy lifting
B. Work involving sparks or open flames
C. Work in high temperatures
D. Work near electrical outlets
