Dante Certification Level 2 (2nd Edition)
Latest 2026 UPDATED Exam Questions
And Verified Answers| Graded A+ |
100% Success
Since the beginning of Dante, multicast flows could carry [ __ ] channels per
flow. With newer firmware, some devices can allow up to [ __ ] channels per
flow. - Correct Answer -8, 64
What protocol is used to synchronize Dante devices across the network? -
Correct Answer -PTP (Precision Time Protocol)
A unicast subscription is made between two Dante devices. The default latency
settings of the transmitter and receiver are 0.25msec and 0.5msec, respectively.
What is the resulting latency of this stream? - Correct Answer -.5msec
When a Dante preset is saved, where is the information kept? - Correct Answer -
Dante Controller writes a text file (XML format) to the computer. This file can be
shared to other users or archived for recall later. When the preset is recalled,
Dante Controller systematically restores settings, one at a time.
, Which Dante software supports redundant connections? - Correct Answer -
Dante Controller
If a Dante transmitter runs out of flows, what should you do to enable all
subscriptions to be made? - Correct Answer -Flip stream(s) to multicast so it only
takes one flow for multiple destinations.
If a Dante device is in redundant mode, can the ports use different configuration
methods? For instance, can the primary port be set to a Static IP and the
secondary follow Link Local? - Correct Answer -Yes
For Dante AV Ultra, up to [ _ ] video channel(s) and up to [ _ ] audio channel(s)
can be transmitted or received. The chipset can [___________________ ]. -
Correct Answer -1, 8, choose, be configured as either an AV transmitter or AV
receiver
Suppose a Dante device has one channel and two transmit flows. Can it connect
to three different receiving devices? - Correct Answer -Yes. The channel must be
sent as multicast.
Latest 2026 UPDATED Exam Questions
And Verified Answers| Graded A+ |
100% Success
Since the beginning of Dante, multicast flows could carry [ __ ] channels per
flow. With newer firmware, some devices can allow up to [ __ ] channels per
flow. - Correct Answer -8, 64
What protocol is used to synchronize Dante devices across the network? -
Correct Answer -PTP (Precision Time Protocol)
A unicast subscription is made between two Dante devices. The default latency
settings of the transmitter and receiver are 0.25msec and 0.5msec, respectively.
What is the resulting latency of this stream? - Correct Answer -.5msec
When a Dante preset is saved, where is the information kept? - Correct Answer -
Dante Controller writes a text file (XML format) to the computer. This file can be
shared to other users or archived for recall later. When the preset is recalled,
Dante Controller systematically restores settings, one at a time.
, Which Dante software supports redundant connections? - Correct Answer -
Dante Controller
If a Dante transmitter runs out of flows, what should you do to enable all
subscriptions to be made? - Correct Answer -Flip stream(s) to multicast so it only
takes one flow for multiple destinations.
If a Dante device is in redundant mode, can the ports use different configuration
methods? For instance, can the primary port be set to a Static IP and the
secondary follow Link Local? - Correct Answer -Yes
For Dante AV Ultra, up to [ _ ] video channel(s) and up to [ _ ] audio channel(s)
can be transmitted or received. The chipset can [___________________ ]. -
Correct Answer -1, 8, choose, be configured as either an AV transmitter or AV
receiver
Suppose a Dante device has one channel and two transmit flows. Can it connect
to three different receiving devices? - Correct Answer -Yes. The channel must be
sent as multicast.
