Dell Client Foundation Assessment
Practice Questions and Answers
1.Which of the following is true about Pre-Boot System Diagnostics?
(Select 3)
Answer - When BIOS detects an abnormal condition on the boot, it
automatically runs the Pre-Boot System Diagnostics tests.
-Pre-boot system Diagnostics tests your hardware without using the
operating system.
-The diagnostics go through every detected hardware component and
notifies the user of any errors.
2.A customer is getting a "No bootable device found" message while
power- ing on the system. Which option under the BIOS would help to fix
this issue?
Answer - Boot Configuration
3.Which of the following is the correct way to trigger BIOS Recovery?
Answer -For desktops, power on the system and hold down "CTRL +
Esc" Key.
4.For Vostro 5890, under which option of the BIOS Setup Utility can one
1/
8
, find the 'BIOS Recovery from Hard Drive' option?
Answer - IS NOT Preboot behavior
5.You want to perform an in-depth test of a device in an Advanced Test in
Pre-boot system diagnostics. Which checkbox in the Advanced test will
help you attain the desired outcome?
Answer -Thorough mode.
6.What should a user do to preserve BIOS settings before recovering the
system?
Answer - Set the "Reset NVRAM" option to "Disabled" before starting the
recovery process.
7.To prevent CPU pins from bending or any damage to the motherboard,
technicians must ensure that
(Select 2)
Answer - ESD bag is used for repackaging.
- CPU cover is placed back covering the CPU socket.
8.Select the BIOS options which support in preparing a device for
encryption. (Select 2)
Answer - BIOS in UEFI mode
- TPM Disabled
2/
8
Practice Questions and Answers
1.Which of the following is true about Pre-Boot System Diagnostics?
(Select 3)
Answer - When BIOS detects an abnormal condition on the boot, it
automatically runs the Pre-Boot System Diagnostics tests.
-Pre-boot system Diagnostics tests your hardware without using the
operating system.
-The diagnostics go through every detected hardware component and
notifies the user of any errors.
2.A customer is getting a "No bootable device found" message while
power- ing on the system. Which option under the BIOS would help to fix
this issue?
Answer - Boot Configuration
3.Which of the following is the correct way to trigger BIOS Recovery?
Answer -For desktops, power on the system and hold down "CTRL +
Esc" Key.
4.For Vostro 5890, under which option of the BIOS Setup Utility can one
1/
8
, find the 'BIOS Recovery from Hard Drive' option?
Answer - IS NOT Preboot behavior
5.You want to perform an in-depth test of a device in an Advanced Test in
Pre-boot system diagnostics. Which checkbox in the Advanced test will
help you attain the desired outcome?
Answer -Thorough mode.
6.What should a user do to preserve BIOS settings before recovering the
system?
Answer - Set the "Reset NVRAM" option to "Disabled" before starting the
recovery process.
7.To prevent CPU pins from bending or any damage to the motherboard,
technicians must ensure that
(Select 2)
Answer - ESD bag is used for repackaging.
- CPU cover is placed back covering the CPU socket.
8.Select the BIOS options which support in preparing a device for
encryption. (Select 2)
Answer - BIOS in UEFI mode
- TPM Disabled
2/
8
