IICRC TCST TRAUMA AND CRIME SCENE
CLEAN UP PRACTICE EXAM 2026 133
QUESTIONS WITH COMPLETE SOLUTIONS
◉ Our primary concern on all trauma work is: Answer:
◉ The three primary areas of technician training are: Answer:
◉ Safety recommendations establish a hierarchy of safety controls.
The most
preferred control at the top of the hierarchy is ___________________ of
the hazard Answer:
◉ When Elimination and Substitution are not feasible, the next three
safety controls
are: Answer:
◉ One example of an Engineering control is to ____________________ all
electrical
energy sources before cleaning machines. Answer:
,◉ Examples of Administrative controls are to schedule appropriate
________________
and to rotate workers between rest schedules and _________________.
Answer:
◉ Personal protective equipment (PPE) is intended to protect an
employee's body
from all _____________________________, such as inhalation of or skin
contact with
microorganisms. Answer:
◉ Employees must be adequately trained on how to ___________ PPE
properly. Answer:
◉ Mark the following as AC (administrative control), EC
(engineering control) or
PPE (personal protection equipment):
________warning signs
_______ safety programs at the employer level
_______ plastic barriers or containment
_______ protective clothing and respiratory devices
_______ grounded electrical equipment
, _______ face shields Answer:
◉ Blood and OPIM are _______________ hazards once they dry and
become airborne. Answer:
◉ When cleaning a putrefaction site, proper respiratory protection
will include full
face respirator with a ___________ filter cartridge and ___________ vapor
cartridge. Answer:
◉ The effectiveness of respirators is expressed by an
__________________________
(_________). Answer:
◉ Respiratory protection regulations state that the employer must
provide: Answer:
◉ An "N-95" respirator is __________ % efficient at removing small
particles and is
___________________________ to oil mists. Answer:
◉ A "P-100" respirator is High Efficiency Particulate Air (________)
removing
CLEAN UP PRACTICE EXAM 2026 133
QUESTIONS WITH COMPLETE SOLUTIONS
◉ Our primary concern on all trauma work is: Answer:
◉ The three primary areas of technician training are: Answer:
◉ Safety recommendations establish a hierarchy of safety controls.
The most
preferred control at the top of the hierarchy is ___________________ of
the hazard Answer:
◉ When Elimination and Substitution are not feasible, the next three
safety controls
are: Answer:
◉ One example of an Engineering control is to ____________________ all
electrical
energy sources before cleaning machines. Answer:
,◉ Examples of Administrative controls are to schedule appropriate
________________
and to rotate workers between rest schedules and _________________.
Answer:
◉ Personal protective equipment (PPE) is intended to protect an
employee's body
from all _____________________________, such as inhalation of or skin
contact with
microorganisms. Answer:
◉ Employees must be adequately trained on how to ___________ PPE
properly. Answer:
◉ Mark the following as AC (administrative control), EC
(engineering control) or
PPE (personal protection equipment):
________warning signs
_______ safety programs at the employer level
_______ plastic barriers or containment
_______ protective clothing and respiratory devices
_______ grounded electrical equipment
, _______ face shields Answer:
◉ Blood and OPIM are _______________ hazards once they dry and
become airborne. Answer:
◉ When cleaning a putrefaction site, proper respiratory protection
will include full
face respirator with a ___________ filter cartridge and ___________ vapor
cartridge. Answer:
◉ The effectiveness of respirators is expressed by an
__________________________
(_________). Answer:
◉ Respiratory protection regulations state that the employer must
provide: Answer:
◉ An "N-95" respirator is __________ % efficient at removing small
particles and is
___________________________ to oil mists. Answer:
◉ A "P-100" respirator is High Efficiency Particulate Air (________)
removing
