NRA Instructors class Questions And
100% Verified Answers Latest 2026
Update | Graded A+ | 100% Success
when students fire the initial qualification, the required distance is :
a) 5 ft
b) 5 yes
c) 10 ft
d) 10 yds - CORRECT ANSWER -c) 10 ft
when unloading a semiautomatic pistol, you should keep the pistol
pointed in a safe direction, keep the finger off the trigger, and:
a) remove the magazine, pull the slide back, and inspect the chamber to
make sure it is empty.
b) put the safety on. and pull the slide back
c)pull the hammer back
d) pull the slide back and remove the magazine. - CORRECT ANSWER -
a)remove the magazine, pull the slide back, and inspect the chamber to
make sure it is empty.
,T/F the one handed standing position is an optional exercise in the basic
pistol shooting course. - CORRECT ANSWER -True
T/F rifling is found inside the bore and is made up of spiral lands and
grooves. - CORRECT ANSWER -True
T/F. filling out and signing off on the performance requirements
checklist as objectives are completed is optional - CORRECT ANSWER -
False
T/F dry fireing is an acceptable training technique in pistol shooting -
CORRECT ANSWER -True
T/F. students should use their non-dominat eye for a mining - CORRECT
ANSWER -false
, T/F. when a cartridge fails to fire after the primer has been struck by the
fireing pin, the shooter should keep the gun pointed in a safe direction
in case of a hang fire - CORRECT ANSWER -True
T/F. it is not important that the pistol shooter focus on the front sight -
CORRECT ANSWER -false
T/F. aiming and breathing control are the two most important
fundamentals in fireing a shot. - CORRECT ANSWER -false
T/F if unable to print the qualification targets to the proper size, you can
create your own tonmeet the standard. - CORRECT ANSWER -True
T/F. only the best shooters cab hold rhe pistol perfectly still - CORRECT
ANSWER -false
T/F. the action is the backbone to which all other parts of a pistol are
attached. - CORRECT ANSWER -false
100% Verified Answers Latest 2026
Update | Graded A+ | 100% Success
when students fire the initial qualification, the required distance is :
a) 5 ft
b) 5 yes
c) 10 ft
d) 10 yds - CORRECT ANSWER -c) 10 ft
when unloading a semiautomatic pistol, you should keep the pistol
pointed in a safe direction, keep the finger off the trigger, and:
a) remove the magazine, pull the slide back, and inspect the chamber to
make sure it is empty.
b) put the safety on. and pull the slide back
c)pull the hammer back
d) pull the slide back and remove the magazine. - CORRECT ANSWER -
a)remove the magazine, pull the slide back, and inspect the chamber to
make sure it is empty.
,T/F the one handed standing position is an optional exercise in the basic
pistol shooting course. - CORRECT ANSWER -True
T/F rifling is found inside the bore and is made up of spiral lands and
grooves. - CORRECT ANSWER -True
T/F. filling out and signing off on the performance requirements
checklist as objectives are completed is optional - CORRECT ANSWER -
False
T/F dry fireing is an acceptable training technique in pistol shooting -
CORRECT ANSWER -True
T/F. students should use their non-dominat eye for a mining - CORRECT
ANSWER -false
, T/F. when a cartridge fails to fire after the primer has been struck by the
fireing pin, the shooter should keep the gun pointed in a safe direction
in case of a hang fire - CORRECT ANSWER -True
T/F. it is not important that the pistol shooter focus on the front sight -
CORRECT ANSWER -false
T/F. aiming and breathing control are the two most important
fundamentals in fireing a shot. - CORRECT ANSWER -false
T/F if unable to print the qualification targets to the proper size, you can
create your own tonmeet the standard. - CORRECT ANSWER -True
T/F. only the best shooters cab hold rhe pistol perfectly still - CORRECT
ANSWER -false
T/F. the action is the backbone to which all other parts of a pistol are
attached. - CORRECT ANSWER -false
