Hazmat Operations Test ACTUAL
QUESTIONS AND CORRECT ANSWERS
-Adsorption is the process of: - CORRECT ANSWERS
Adhering the contaminant to a surface
A tank carrier designed to haul various chemicals whose pressures are
less than 40 PSI would be a: - CORRECT ANSWERS MC
306/DOT 406
The immediate concern when dealing with combustible liquid spills is
to: - CORRECT ANSWERS Prevent ignition of the fuel
The highest level of respiratory protection is needed but lesser
chemical protection is required for the skin best describes _______
protection. - CORRECT ANSWERS Level B
Chemical Transportation Emergency Center (CHEMTREC) is able to
provide assistance to responders if: - CORRECT ANSWERS
The name of the shipper and manufacturer is known
Determining whether a vapor will rise or fall is commonly referred to
as: - CORRECT ANSWERS Vapor Density
The maximum hose length allowed by NIOSH when using an airline
hose respirator is ______ feet. - CORRECT ANSWERS 300
, If a product with a vapor density of 1.6 escaped from its container,
you would expect the product to: - CORRECT ANSWERS
Collect in low-lying areas
Which resources are available for determining the concentrations of a
released hazardous material in an endangered area? - CORRECT
ANSWERS Monitoring equipment should be utilized, keeping
in mind that Haz-Mat technicians are needed to operate this
equipment.
Chemicals that ignite when combined create a(n) __________
reaction. - CORRECT ANSWERS Exothermic
The eight-step process recommended for assessing a hazardous
materials incident includes: - CORRECT ANSWERS Hazard
and Risk evaluation
What would be the likely result of allowing a contaminated individual
to leave the hot zone without being decontaminated? - CORRECT
ANSWERS The contaminates would likely be transferred to
other personal and equipment resulting in secondary contamination.
When dealing with a Level III incident, it is expected that evacuation
of people will cover an area of. - CORRECT ANSWERS Large
scale evacuation.
The minimum temperature to which a fuel in air must be heated to
initiate self-sustained combustion without initiation from an
QUESTIONS AND CORRECT ANSWERS
-Adsorption is the process of: - CORRECT ANSWERS
Adhering the contaminant to a surface
A tank carrier designed to haul various chemicals whose pressures are
less than 40 PSI would be a: - CORRECT ANSWERS MC
306/DOT 406
The immediate concern when dealing with combustible liquid spills is
to: - CORRECT ANSWERS Prevent ignition of the fuel
The highest level of respiratory protection is needed but lesser
chemical protection is required for the skin best describes _______
protection. - CORRECT ANSWERS Level B
Chemical Transportation Emergency Center (CHEMTREC) is able to
provide assistance to responders if: - CORRECT ANSWERS
The name of the shipper and manufacturer is known
Determining whether a vapor will rise or fall is commonly referred to
as: - CORRECT ANSWERS Vapor Density
The maximum hose length allowed by NIOSH when using an airline
hose respirator is ______ feet. - CORRECT ANSWERS 300
, If a product with a vapor density of 1.6 escaped from its container,
you would expect the product to: - CORRECT ANSWERS
Collect in low-lying areas
Which resources are available for determining the concentrations of a
released hazardous material in an endangered area? - CORRECT
ANSWERS Monitoring equipment should be utilized, keeping
in mind that Haz-Mat technicians are needed to operate this
equipment.
Chemicals that ignite when combined create a(n) __________
reaction. - CORRECT ANSWERS Exothermic
The eight-step process recommended for assessing a hazardous
materials incident includes: - CORRECT ANSWERS Hazard
and Risk evaluation
What would be the likely result of allowing a contaminated individual
to leave the hot zone without being decontaminated? - CORRECT
ANSWERS The contaminates would likely be transferred to
other personal and equipment resulting in secondary contamination.
When dealing with a Level III incident, it is expected that evacuation
of people will cover an area of. - CORRECT ANSWERS Large
scale evacuation.
The minimum temperature to which a fuel in air must be heated to
initiate self-sustained combustion without initiation from an
