SONICWALL SNSA 2026 EXAMINATION TEST QUESTIONS AND ANSWERS RATED A+

SONICWALL SNSA 2026 EXAMINATION TEST QUESTIONS
AND ANSWERS RATED A+
✔✔Address Objects - ✔✔____________________ allow for entities to be defined one
time and to be re used in multiple referential instances through the SonicOS interface

✔✔Object > Match Objects > Services > Service Objects > Add - ✔✔Create a Service
Object (5)

✔✔Service Object - ✔✔_____________________ is a protocol/port range combination
that defines a service

✔✔Service Group - ✔✔________________________ is a group of services that, after
defined, enable you to quickly establish firewall rules without manually configuring each
service

✔✔F - ✔✔T/F: By default, no services are predefined

✔✔T - ✔✔T/F: You can create custom service objects and custom service groups to
meet your specific business requirements

✔✔Policy > Rules and Policies > NAT Rules > Add - ✔✔Configure a NAT Rule (4)

✔✔NAT - ✔✔___________________ translates the IP addresses used on your private
LAN to a single, public IP address that is used on the internet

✔✔T - ✔✔T/F: NAT allows multiple computers to access the internet, even if only one
IP address has been provided by your ISP

✔✔One-to-One - ✔✔NAT Policy: Maps directly to another IP address

✔✔Many-to-One - ✔✔NAT Policy: allows multiple hosts on your LAN to communicate
with hosts on the internet by sharing the WAN public IP addresses

✔✔Many-to-Many - ✔✔NAT Policy: allows groups of IP addresses to map to another
group of IP addresses

✔✔Policy > Rules and Policies > Access Rules > Zone Selector - ✔✔Edit the Zone
Matrix Selector (4)

✔✔Policy > Rules and Policies > Access Rules > Add - ✔✔Create an Access Rule (4)

✔✔Action
Type

, Priority
Schedule
Enable - ✔✔What are the five Configuration Options for Access Rules?

✔✔Action - ✔✔AR Config Option: Allow, Deny, Discard

✔✔Type - ✔✔AR Config Option: IPv4 and IPv6

✔✔Priority - ✔✔AR Config Option: Auto prioritize, Insert at the end, Manual

✔✔Schedule - ✔✔AR Config Option: Choose a predefined schedule

✔✔Enable - ✔✔AR Config Option: Enable, Disable

✔✔ - ✔✔_______________________ are network management tools that allow you to
define inbound and outbound access policies

✔✔T - ✔✔T/F: The default network access rules allow traffic outbound to the internet
and block incoming traffic from the internet

✔✔T - ✔✔T/F: SonicWall devices allow users to create custom rules to effectively
address their network security requirements.

✔✔F - ✔✔T/F: Custom access rules CANNOT be defined to extend or override the
default access rules

✔✔Bandwidth Rule - ✔✔_______________________ is an access rule with bandwidth
object assigned to it

✔✔Classifier
Bandwidth Rule - ✔✔A Bandwidth Management Policy (BWM) consists of two parts:
____________________ and ______________________

✔✔Object > Profile Objects > Bandwidth > Add - ✔✔Create a Bandwidth Object (4)

✔✔Policy > Rules and Policies > Access Rules > Edit Rule > Egress BWM - ✔✔Assign
Bandwidth Object to an Access Rule (5)

✔✔Network > System > Interfaces > Edit Interface - X1 > Advanced > Enable Egress >
Enable Ingress - ✔✔Configure the WAN interface bandwidth (7)

✔✔Bandwidth Management (BWM) - ✔✔_________________ is a means of allocating
bandwidth resources to critical network application