IICRC WRT EXAM, MOST RECENT EXAM 2026 ACTUAL COMPLETE REAL EXAM QUESTIONS AND ACCURATE ANSWERS (VERIFIED ANSWERS) | ALREADY GRADED A+ !! NEWEST EXAM | JUST RELEASED!!

IICRC WRT EXAM, MOST RECENT EXAM 2026 ACTUAL
COMPLETE REAL EXAM QUESTIONS AND ACCURATE
ANSWERS (VERIFIED ANSWERS) | ALREADY GRADED
A+ !! NEWEST EXAM | JUST RELEASED!!




What is the goal for day 2 drying? - ANSWER-To get the
humidity under 70 to
ensure
mitigation.


Dew point is also known as ___. - ANSWER-saturation
temperature or
condensation


The Dew Point - ANSWER-the temperature at which the
air becomes
saturated with water vapor (100%RH) and condenses on the
cooler surfaces.


Where does condensation moisture cause mold? - ANSWER-
Mold growth can occur in cold spots of homes and buildings
where warm indoor air encounters cold outside air or vice
versa.
When does evaporation occur? - ANSWER-when vapor
pressure of the ambient air (air in the room) is lower that the
vapor pressure of the wet material.

, What else can increase evaporation? - ANSWER-If the air has
low Vapor Pressure (VP) and can be heated the added thermal
energy (heat) will also increase the rate of evaporation.


The potential for damage to hygroscopic material is... -
ANSWER-...greatest
when Relative Humidity is
over 70%


Why is it imperative that the RH is lowered below 70% by the
second day? - ANSWER-RH over 70% for more than 48 hours
can provide the right amount of water activity to promote
mold growth.


Hygroscopic materials continue to absorb... - ANSWER-
...water vapor at a given temperature and relative humidity
until they have reached equilibrium.


Hardwood furniture in an extremely humid building may... -
ANSWER-...swell
and release stains as the moisture content
increase.


When is closed drying used? - ANSWER-When the outside
air is too wet or
cold to aide in the drying
process.