Medical Gas Practice Test 2-Solved 2026

Medical Gas Practice Test 2-Solved 2026 Installers of a category 1 Medical gas pipe distribution system must be qualified in accordance with ASSE 6010. What is certification requirement for installers of Category 3 Medical gas pipe distribution system? - answer-6010 When is the initial pressure test conducted by the installer? - answer-After blowdown of the distribution piping In those portions of systems intended to handle oxygen pressures greater than 350 PSI, the interconnecting hose shall not contain ____ materials. - answer-Polymeric Which of these is an NFPA 99 requirement for the labeling of pipes in a medical gas system. - answerColor coding A wireless communication device is employed in a medical gas or vacuum warning system. Which type of supervision is required for this device? - answer-The device shall be supervised such that failure communication shall initiate an alarm. Wat sort of treatment is permited before brazing the cut ends of a tube to be installed in medical gas piping system - answer-The cut ends may be rolled smooth or deburred Manifolds for gas cylinders shall actuate a ____ signal and shall activate an indicator at all _____ alarm panels to indicate when, or just before, changeover from one header to the other. - answer-Local signal to master alarm panel Where liquid ring compressors are used, air receivers shall be equipped with a highwater level sensor that activates a ______ alarm indicator. - answer-Local Instrument air systems shall activate the alarm systems when the dew point at system pressure exceeds how many degrees Fahrenheit - answer--22 degrees