CDC 3E051 Set 2 Vol 3 Exam
Questions and Answers 100%
PASS
What valuable tool in the electric shop will show you the physical location of
distribution
system components?
a. Schematic Drawing.
b. One Line Diagram.
c. As-Built Drawing.
d. Distribution Map. - CORRECT ANSWER-d. Distribution Map.
What informs electric shop personnel of unique conditions on the distribution
system?
a. Switching Chart.
b. Distribution Map.
c. One Line Diagram.
d. Abnormal Conditions listing. - CORRECT ANSWER-d. Abnormal Conditions
listing.
,What types of conductor support construction should be used on distribution
systems located
in high moisture environments?
a. Steel Crossarms or Fiberglass Crossarms.
b. Fiberglass Crossarms or Wood Crossarms.
c. Epoxy Fiberglass Arms or Steel Crossarms.
d. Fiberglass Crossarms or Epoxy Fiberglass Arms - CORRECT ANSWER-d.
Fiberglass Crossarms or Epoxy Fiberglass Arms
What insulator type is commonly connected to one another?
a. Pin.
b. Strain.
c. Deadend.
d. Suspension. - CORRECT ANSWER-d. Suspension
What insulator will you use on low-voltage or neutral conductors?
a. Pin.
b. Strain.
c. Spool.
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
,d. Suspension. - CORRECT ANSWER-c. Spool
What insulator is used to insulate guy wires?
a. Pin.
b. Strain.
c. Spool.
d. Suspension. - CORRECT ANSWER-b. Strain
The American National Standards Institute class of an insulator is determined by
the
a. operating voltage.
b. atmospheric pollution.
c. atmospheric pollution and arcing voltage.
d. atmospheric pollution and operating voltage. - CORRECT ANSWER-d.
atmospheric pollution and operating voltage
In addition to engineers or the planning section, who assists in making a "staking
sheet" of
the area over which the line is to pass?
a. A line crew.
b. A survey crew.
, c. The graphics shop.
d. The electrical supervisor. - CORRECT ANSWER-b. A survey crew
The AF Form 103, Base Civil Engineering Work Clearance Request, is used for
a. staking sheets.
b. digging permits.
c. right-of-way requests.
d. overhead line locations. - CORRECT ANSWER-b. digging permits
How many inches deeper do we set poles that are subject to more strain than
normal?
a. 2.
b. 4.
c. 6.
d. 8. - CORRECT ANSWER-c. 6
What tool do workers use to position poles on the ground?
a. Pike pole.
b. Cant hook.
c. Digging bar.
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
Questions and Answers 100%
PASS
What valuable tool in the electric shop will show you the physical location of
distribution
system components?
a. Schematic Drawing.
b. One Line Diagram.
c. As-Built Drawing.
d. Distribution Map. - CORRECT ANSWER-d. Distribution Map.
What informs electric shop personnel of unique conditions on the distribution
system?
a. Switching Chart.
b. Distribution Map.
c. One Line Diagram.
d. Abnormal Conditions listing. - CORRECT ANSWER-d. Abnormal Conditions
listing.
,What types of conductor support construction should be used on distribution
systems located
in high moisture environments?
a. Steel Crossarms or Fiberglass Crossarms.
b. Fiberglass Crossarms or Wood Crossarms.
c. Epoxy Fiberglass Arms or Steel Crossarms.
d. Fiberglass Crossarms or Epoxy Fiberglass Arms - CORRECT ANSWER-d.
Fiberglass Crossarms or Epoxy Fiberglass Arms
What insulator type is commonly connected to one another?
a. Pin.
b. Strain.
c. Deadend.
d. Suspension. - CORRECT ANSWER-d. Suspension
What insulator will you use on low-voltage or neutral conductors?
a. Pin.
b. Strain.
c. Spool.
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
,d. Suspension. - CORRECT ANSWER-c. Spool
What insulator is used to insulate guy wires?
a. Pin.
b. Strain.
c. Spool.
d. Suspension. - CORRECT ANSWER-b. Strain
The American National Standards Institute class of an insulator is determined by
the
a. operating voltage.
b. atmospheric pollution.
c. atmospheric pollution and arcing voltage.
d. atmospheric pollution and operating voltage. - CORRECT ANSWER-d.
atmospheric pollution and operating voltage
In addition to engineers or the planning section, who assists in making a "staking
sheet" of
the area over which the line is to pass?
a. A line crew.
b. A survey crew.
, c. The graphics shop.
d. The electrical supervisor. - CORRECT ANSWER-b. A survey crew
The AF Form 103, Base Civil Engineering Work Clearance Request, is used for
a. staking sheets.
b. digging permits.
c. right-of-way requests.
d. overhead line locations. - CORRECT ANSWER-b. digging permits
How many inches deeper do we set poles that are subject to more strain than
normal?
a. 2.
b. 4.
c. 6.
d. 8. - CORRECT ANSWER-c. 6
What tool do workers use to position poles on the ground?
a. Pike pole.
b. Cant hook.
c. Digging bar.
COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED
