NFPA 160
Study online at https://quizlet.com/_1f0ce4
1. Accessible haz- Area made hazardous by the flame effect that is normally accessible to a person
ard area without the deliberate use of an additional means of access that is not normally in
place
2. Storage area where fuel or materials are held prior to use to movment to holding area
3. Direct ignition automatic or manual ignition system that ignites fuel without a pilot
4. Fail-safe a state or an attribute of a system such that every single point failure in the system
results in all controlling parts of the system with the ability to do harm to humans,
animals, or equipment being disconnected from all sources of power and stored
energy at the primary disconnect point
5. Fire after arm, it is the control system functions that result in the deliberate release of
fuel for ignition
6. Flame effect A burner designed to produce specific sizes and configurations of flames for flame
burner effects
7. Flame effect ma- A flammable material that is used as fuel to create a flame
terial
8. Flame effect safe- A control system that is part of a flame effect appliance that is used to prove that
ty controller the source of ignition is present (flame safeguard control)
9. Group II flame ef- An individual or group flame effect designed fro unattended operation that is
fect temporarily or permanently installed outside any sructure (eternal monument
flame)
10. Group III flame ef- An attended, temporarily installed flame effect for a specific production with limited
fect operation and fixed time for removal
11. Group IV flame ef-
fect
, NFPA 160
Study online at https://quizlet.com/_1f0ce4
Large or group flame effect that is permanently installed inside or outside any
structure desined for unattended operation WITHOUT a main show supervisory
control system
12. Group V flame ef- A large individual or group flame effect that is temporarily or permanently installed
fect inside or outside any structure and is designed for intermittent or continuous
operation under the supervision of a main show control system, but without
full-time supervision by a technition
13. Group VI flame ef- A large individual or group flame effect that is temporarily or permanently installed
fect outside or inside any structure and is designed for intermittent operation under
the supervision of a main show control system and a technical director, with cast
members in close proximity to the effect at the time of operation
14. Group VII flame an individual flame effect that can be tomprarily or permanently installed inside or
effect outside any structure that, due to its unique operating requirements, does not fit
into any other classification
15. Permanent in- more than 180 days
stallation
16. temporary instal- duration of 180 days or less within a 12-month period in a single venue
lation
17. Flame effect plan document that is used to convery to the AHJ the information needed to evaluate
the flame effect for the purpose of applying for a permit
18. Primary safety A control with a sensor that is directly responsive to the ignition device attributes
control necessary for the safe operation of the effect
19. proven pilot a pilot flame supervised by a primary safety ctonrol
20. Safety critical the failure of a device component, system, or mechanism, which results in a
situation that is immediately dangerous to life, health, or property
Study online at https://quizlet.com/_1f0ce4
1. Accessible haz- Area made hazardous by the flame effect that is normally accessible to a person
ard area without the deliberate use of an additional means of access that is not normally in
place
2. Storage area where fuel or materials are held prior to use to movment to holding area
3. Direct ignition automatic or manual ignition system that ignites fuel without a pilot
4. Fail-safe a state or an attribute of a system such that every single point failure in the system
results in all controlling parts of the system with the ability to do harm to humans,
animals, or equipment being disconnected from all sources of power and stored
energy at the primary disconnect point
5. Fire after arm, it is the control system functions that result in the deliberate release of
fuel for ignition
6. Flame effect A burner designed to produce specific sizes and configurations of flames for flame
burner effects
7. Flame effect ma- A flammable material that is used as fuel to create a flame
terial
8. Flame effect safe- A control system that is part of a flame effect appliance that is used to prove that
ty controller the source of ignition is present (flame safeguard control)
9. Group II flame ef- An individual or group flame effect designed fro unattended operation that is
fect temporarily or permanently installed outside any sructure (eternal monument
flame)
10. Group III flame ef- An attended, temporarily installed flame effect for a specific production with limited
fect operation and fixed time for removal
11. Group IV flame ef-
fect
, NFPA 160
Study online at https://quizlet.com/_1f0ce4
Large or group flame effect that is permanently installed inside or outside any
structure desined for unattended operation WITHOUT a main show supervisory
control system
12. Group V flame ef- A large individual or group flame effect that is temporarily or permanently installed
fect inside or outside any structure and is designed for intermittent or continuous
operation under the supervision of a main show control system, but without
full-time supervision by a technition
13. Group VI flame ef- A large individual or group flame effect that is temporarily or permanently installed
fect outside or inside any structure and is designed for intermittent operation under
the supervision of a main show control system and a technical director, with cast
members in close proximity to the effect at the time of operation
14. Group VII flame an individual flame effect that can be tomprarily or permanently installed inside or
effect outside any structure that, due to its unique operating requirements, does not fit
into any other classification
15. Permanent in- more than 180 days
stallation
16. temporary instal- duration of 180 days or less within a 12-month period in a single venue
lation
17. Flame effect plan document that is used to convery to the AHJ the information needed to evaluate
the flame effect for the purpose of applying for a permit
18. Primary safety A control with a sensor that is directly responsive to the ignition device attributes
control necessary for the safe operation of the effect
19. proven pilot a pilot flame supervised by a primary safety ctonrol
20. Safety critical the failure of a device component, system, or mechanism, which results in a
situation that is immediately dangerous to life, health, or property
