NCCCO Rigger II Practice Test 2027: Free Exam Questions &
Answers PDF
Exam
Are you preparing for your NCCCO Rigger Level II certification exam in 2027? Access the
most current and comprehensive free practice test available online, designed to mirror
the actual NCCCO Rigger 2 exam format. Our updated 2027 study guide includes
detailed explanations for each question, covering critical topics such as ASME B30
standards, rigging calculations, sling configurations, load dynamics, and OSHA safety
compliance. Whether you’re studying in Texas, California, Florida, New York, or
anywhere across the U.S. and Canada, our geotargeted practice material is tailored to
reflect the latest NCCCO certification requirements and regional safety codes. Students
search daily for "NCCCO Rigger II practice questions," "rigger test answers 2027," and
"free rigging exam prep"—now you’ve found the ultimate resource. NCCCO Rigger 2
Practice Test, NCCCO Rigger Level 2 Questions, Rigger Certification Exam 2027, Free
NCCCO Study Guide, Rigging Test Questions and Answers
Eyebolts used with an angular load applied must be of a ______
type
Shouldered
A cylindrical aluminum tank is 12 ft high. The flat tank top and
bottom have a diameter of 6ft. The tank walls are 1/2 inch thick.
Calculate the approximate tank weight.
1978 lbs.
What is the coefficient of friction (CF) for moving metal against
concrete?
.1
, A rigging block is attached to a 4,500 lb load. If 4 parts of line
are used with the block (neglect friction), what is the minimum
amount of line pull required to lift the 4,500 lb load?
1125 lbs
According to ASME B30.10, the maximum hook throat opening
must not exceed ?
5% of its original opening
Based on the information below, what is the minimum size
chain sling needed? 4 leg-bridleLegs at 60 degreesGrade
80Load Weight = 35,492 lbs
5/8"
When inspecting a custom designed lifting accessory, the
following markings should be readily identifiable on the device.
Working Load Limit, serial number, weight (if over 100 lbs.),
manufacturer name and contact information.
A cylindrical steel tank is 10ft high. The flat tank top and bottom
have a diameter of 6 ft. The tank walls are 3/4 inch thick.
Calculate the approximate tank weight.
7,348 lbs
A steel plate is 30 ft. long, 27 inches wide, and 1/4 inch thick.
Calculate the weight of the plate.
675 lbs
According to ASME B30.20, the markings on a Below-the-Hook
Lifting device shall show its weight if over?
100 lbs
A square steel tube is 30 ft long. The tube is 6 ft. tall x 6 ft. wide,
and the tube wall thickness is 3/4 inch. Calculate the
approximate weight of the square steel tube
21,600 lbs
Answers PDF
Exam
Are you preparing for your NCCCO Rigger Level II certification exam in 2027? Access the
most current and comprehensive free practice test available online, designed to mirror
the actual NCCCO Rigger 2 exam format. Our updated 2027 study guide includes
detailed explanations for each question, covering critical topics such as ASME B30
standards, rigging calculations, sling configurations, load dynamics, and OSHA safety
compliance. Whether you’re studying in Texas, California, Florida, New York, or
anywhere across the U.S. and Canada, our geotargeted practice material is tailored to
reflect the latest NCCCO certification requirements and regional safety codes. Students
search daily for "NCCCO Rigger II practice questions," "rigger test answers 2027," and
"free rigging exam prep"—now you’ve found the ultimate resource. NCCCO Rigger 2
Practice Test, NCCCO Rigger Level 2 Questions, Rigger Certification Exam 2027, Free
NCCCO Study Guide, Rigging Test Questions and Answers
Eyebolts used with an angular load applied must be of a ______
type
Shouldered
A cylindrical aluminum tank is 12 ft high. The flat tank top and
bottom have a diameter of 6ft. The tank walls are 1/2 inch thick.
Calculate the approximate tank weight.
1978 lbs.
What is the coefficient of friction (CF) for moving metal against
concrete?
.1
, A rigging block is attached to a 4,500 lb load. If 4 parts of line
are used with the block (neglect friction), what is the minimum
amount of line pull required to lift the 4,500 lb load?
1125 lbs
According to ASME B30.10, the maximum hook throat opening
must not exceed ?
5% of its original opening
Based on the information below, what is the minimum size
chain sling needed? 4 leg-bridleLegs at 60 degreesGrade
80Load Weight = 35,492 lbs
5/8"
When inspecting a custom designed lifting accessory, the
following markings should be readily identifiable on the device.
Working Load Limit, serial number, weight (if over 100 lbs.),
manufacturer name and contact information.
A cylindrical steel tank is 10ft high. The flat tank top and bottom
have a diameter of 6 ft. The tank walls are 3/4 inch thick.
Calculate the approximate tank weight.
7,348 lbs
A steel plate is 30 ft. long, 27 inches wide, and 1/4 inch thick.
Calculate the weight of the plate.
675 lbs
According to ASME B30.20, the markings on a Below-the-Hook
Lifting device shall show its weight if over?
100 lbs
A square steel tube is 30 ft long. The tube is 6 ft. tall x 6 ft. wide,
and the tube wall thickness is 3/4 inch. Calculate the
approximate weight of the square steel tube
21,600 lbs
