DETAILED
ANSWERS|LATEST!!!!2025/2026|GUARANTEED
All solder connections shall indicate evidence of __________ - ANSWER wetting and
adherence
Electrical/mechanical components and wires to be soldered shall meet the solderiability of
what document or equivalent - ANSWER J std 002
In the event of a conflict between this standard and applicable engineering documentation
the ____________ governs.
- ANSWER user approved engineering documentation
Straight through or lead/wires wrapped less than 180 degrees shall show evidence of good
wetting for _________%
- ANSWER 100
The IPC -T-50 document provides ______________ - ANSWER terms and definitions
Assemblies subjected to cleaning processes shall be free of _________ -
ANSWER visible residues
It is the responsibility of the __________to identify defects and process indicators that are
unique to the process assembly - ANSWER manufacturer
1
, The _________has the responsibility for identifying the class to which the assembly is
produced - ANSWER user
Leads/wires with a wrap of 180 degrees or greater shall show evidence of good wetting for a
minimum of _______% - ANSWER 75
Which class product includes continued performance and extended life, uninterrupted
service is desired but not critical? - ANSWER class 2
When a wire/lead is wrapped more than 360 degrees and remains in contact with the
terminal. This condition is known as? - ANSWER wire overwrap
The ______ ________ _________ is intended for use only after a defect has been
determined but is not completely identifiable. - ANSWER referee magnification power
If the user does not establish and document the acceptance class the ________ may do so. -
ANSWER manufacturer
The absence of solder in a localized area inside a solder fillet is a ________ -
ANSWER solder void
Illumination at the surface of work stations should be atleast ___________ lux -
ANSWER 1000 lux or 93 foot candles
CIS cool down period is - ANSWER 1,2 and 7 days
The _________always takes precedence over this standard, reference standards and
drawings - ANSWER contract
2
ANSWERS|LATEST!!!!2025/2026|GUARANTEED
All solder connections shall indicate evidence of __________ - ANSWER wetting and
adherence
Electrical/mechanical components and wires to be soldered shall meet the solderiability of
what document or equivalent - ANSWER J std 002
In the event of a conflict between this standard and applicable engineering documentation
the ____________ governs.
- ANSWER user approved engineering documentation
Straight through or lead/wires wrapped less than 180 degrees shall show evidence of good
wetting for _________%
- ANSWER 100
The IPC -T-50 document provides ______________ - ANSWER terms and definitions
Assemblies subjected to cleaning processes shall be free of _________ -
ANSWER visible residues
It is the responsibility of the __________to identify defects and process indicators that are
unique to the process assembly - ANSWER manufacturer
1
, The _________has the responsibility for identifying the class to which the assembly is
produced - ANSWER user
Leads/wires with a wrap of 180 degrees or greater shall show evidence of good wetting for a
minimum of _______% - ANSWER 75
Which class product includes continued performance and extended life, uninterrupted
service is desired but not critical? - ANSWER class 2
When a wire/lead is wrapped more than 360 degrees and remains in contact with the
terminal. This condition is known as? - ANSWER wire overwrap
The ______ ________ _________ is intended for use only after a defect has been
determined but is not completely identifiable. - ANSWER referee magnification power
If the user does not establish and document the acceptance class the ________ may do so. -
ANSWER manufacturer
The absence of solder in a localized area inside a solder fillet is a ________ -
ANSWER solder void
Illumination at the surface of work stations should be atleast ___________ lux -
ANSWER 1000 lux or 93 foot candles
CIS cool down period is - ANSWER 1,2 and 7 days
The _________always takes precedence over this standard, reference standards and
drawings - ANSWER contract
2
