Circuit breakers rated Study guides, Class notes & Summaries

When connecting a 3-phase motor the three lines (T1,T2 and T3) are usually connected to __________. - L1, L2, and L3 Electricians use __________ to prevent damage to electrical wiring running to the machine. - rigid and flexible conduit When the wire or foil strip inside a fuse melts, the fuse is said to be __________. - blown The difference between a fuse and a circuit breaker is __________. - circuit breakers can be reset and used again The amount two electrical...

NETA III 2023-2024 Exam Questions with Correct Answers The alternate source for emergency systems are required to be equipped with ground-fault protection of equipment. - ANSWER False Which ANSI/IEEE standard covers SF6 circuit breakers? - ANSWER C37.04 You measure the winding resistance of a 12.4kV, 1000kVA, Delta-Delta connected transformer with a 100A test set. H1-H2 measures 42.0 microhms, H2-H3 measures 41.9 microhms, and H3-H1 measures 84.0 microhms. What can you conclud...

Which of the following is true with regard to switchboards Switchboards are used to subdivide large blocks of power When installing wiring within switchgear, use self adhesive cable ties every ___. 12" (300mm) The maximum voltage that a piece of equipment can withstand is known as its ____. Basic impulse insulation level (BIL) Bolted pressure switches are often used in place of ___. Circuit breakers A transformer's temperature rise rating refers to ___. The max...

NETA III 2024 QUESTIONS WITH CORRECT SOLUTIONS The alternate source for emergency systems are required to be equipped with ground-fault protection of equipment. -Answer-False Which ANSI/IEEE standard covers SF6 circuit breakers? -Answer-C37.04 You measure the winding resistance of a 12.4kV, 1000kVA, Delta-Delta connected transformer with a 100A test set. H1-H2 measures 42.0 microhms, H2-H3 measures 41.9 microhms, and H3- H1 measures 84.0 microhms. What can you conclude from these readings...

Worn motor bearings are most to result in a(n)___. continuous overload A high-level short circuit current may exceed ___. 50,000A` Accidental contact between an electrical conductor and a grounded enclosure is called a(n)___. ground fault Most arcing faults begin as ___. ground faults A plug fuse with a hexagonal cap has a maximum amperage rating of ___. 15A Under normal operation and at currents near its ampere rating, a fuse operates as a ___. conductor...

Journeyman Electrician Exam Questions and Answers 2023 Graded A+ For other than one-and two-family dwellings, when building a new electrical service, at least one (1) 125-volt, single-phase, 15- or 20-ampere-rated receptacle outlet shall be located within at LEAST _____ of the electrical service equipment? -ANS>> 50 feet The ampacity of a conductor is defined by the NEC to be the maximum current, in amperes, a conductor can carry continuously under the conditions of use without exce...

NETA 2 Top Exam Questions and answers, rated A+ Under what considerations can tag out without lock out be permitted? - -***&If an energy isolating device is not capable of being locked For PV systems, a(n) _____ is a device that changes direct-current input to an alternating-current output. - -Inverter Identify the contact pictured above. (NC and NO separated by a node) - -Form C When applying personal protective grounds, which end is attached first? - -***&The equipment end An ...

When using a dynamic schedule and the energy profile in an hour is >250 MW and the actual hourly integration deviates from the hourly energy profile by ____ the tag must be modified. A. 100 MW B. 10% C. 50 MW D. 25% B. 10% Dry steam plants, flash steam plants, and binary cycle power plants are the three main types of what kind of generating plant? A. Nuclear generators B. Combustion turbine generators C. Geothermal generators D. Hydroelectric generators C. Geothermal generators...

Second Year IEC Final Exam Questions and Answers 100% Pass ______ in utility transmission lines reduces the power losses in the transmission conductors. increasing the voltage ______ shall not support luminairs weighing over 6 lb. lampholder _______ surrounds the windings in typical "pole-mounted" transformers. oil 40C = ____ F 104 A .25KVA transformer has a nameplate rating of 240/480 primary volts 120/240 secondary volts. IF rated voltage is applied to the primary the sec...

NETA 2 QUESTIONS AND ANSWERS ALREADY GRADED A Under what considerations can tag out without lock out be permitted? ***&If an energy isolating device is not capable of being locked For PV systems, a(n) _____ is a device that changes direct-current input to an alternating-current output. Inverter Identify the contact pictured above. (NC and NO separated by a node) Form C When applying personal protective grounds, which end is attached first? ***&The equipment end An induction ...