Ase a8 Samenvattingen, Aantekeningen en Examens

ASE A8 (ASE A8 Performance) – Questions With Correct Answers

ASE A8 Engine Performance: Questions & Answers

spark plug wire resistance should be - ANSWER-5000 to 10000 ohms how do you test spark plug cables insulation - ANSWER-spray it with salt water The specification, such as 10 BTDC, indicates that - ANSWER-indicates that the spark occurs at 10 degrees before top dead center of the compression stroke With an increase in speed, ignition must begin - ANSWER-earlier to end by 23 degrees ATDC Each cylinder must produce power once every - ANSWER-720 degrees what is the differance between ...

Section 4 ASE Style Quiz (A8) – Questions & Answers

ASE A8 Practice Test 2024 Edition Questions and Answers

ASE Test Preparation and Study Guide Covers ASE Areas A1-A8 plus A9, G1 and L1 (100% Verified) Third Edition James D. Halderman ASE Certified Master Automobile Technician (A1–A8), plus A9, F1, G1, L1 and L3

The opening temperature - ANSWER-A thermostat is rated at 195°F. This means: a. The opening temperature b. The fully open temperature c. The temperature in the radiator before the thermostat opens d. The temperature that the cooling fan comes on Cause the vehicle to burn more gas than if he left it in gear. - ANSWER-Joe puts his car in neutral while coasting down a mile-long hill in Arizona. This will: a. Cause the vehicle to burn more gas than if he left it in gear. b. Cause the vehic...

spark plug wire resistance should be - ANSWER 5000 to 10000 ohms how do you test spark plug cables insulation - ANSWER spray it with salt water The specification, such as 10 BTDC, indicates that - ANSWER indicates that the spark occurs at 10 degrees before top dead center of the compression stroke With an increase in speed, ignition must begin - ANSWER earlier to end by 23 degrees ATDC Each cylinder must produce power once every - ANSWER 720 degrees what is the differance between tbi pf...

If the compression is 5 psi and the oem spec is 140 psi, what most likely is the cause? A, worn piston ring. B, burnt valve. - ANSWER-Both A and B What most likely is the cause if the compression doesn't go up during a wet compression test? A, burnt valve. B, worn piston ring. - ANSWER-A What most likely is the cause if the compression goes up during a wet compression test? A, burnt valve. B, worn piston ring. - ANSWER-B 2. Blue smoke is coming from the exhaust pipe of a ve...