AMT 2 study guide exam 2024/2025

AMT 2 study guide exam 2024/2025 Amtrak Conductors and Engineer are classified as class ______ employees - CORRECT ANSWER-C. [1.103] Should employees in electrified territory be familiar with the location and operation of radios and telephones? - CORRECT ANSWER-Yes [1.204] When using railroad telephone lines or radios, and you hear the word "EMERGENCY" repeated three times, what must be done? - CORRECT ANSWER-All others using the phone line or radio channel must yield immediately. [1.205] All occurrences or conditions which are likely to affect electric Operations must be reported immediately to whom? - CORRECT ANSWER-The Power Director/Train Dispatcher. [1.201] Minimum Approach Distance means? - CORRECT ANSWER-The distance that must be maintained between personnel and or equipment and all exposed energized lines. Minimum Approach Distance is measured between the person or the end of a tool, equipment, or material being used and the exposed energized parts. [1.301] All overhead wires must be considered energized (Live) at all times except? - CORRECT ANSWER-When it is known to be de-energized, tested de-energized and grounded. [1.302] The third rail must be considered energized (live) at all times except? - CORRECT ANSWER-When it is known to be de-energized, tested de-energized and a Third Rail Warning Device is applied. [1.303] Electric engines and Multiple Units (MU) under overhead wires must be considered energized (Live) except? - CORRECT ANSWER-When it is known that all Pantographs are down and Pantograph grounding switches are closed, or overhead wires are deenergized, tested de-energized and properly grounded. [1.501] Can employees touch or remove unidentified dangling wires, trees, or foreign objects in contact with overhead wires or third rail? - CORRECT ANSWER-NO ,employees must take necessary precautions to protect others and equipment and maintain Minimum Approach Distance . [1.206] Conductive material such as steel tape measure, wire, wet or non-rated rope, or linen tape-line containing metallic reinforcement can be used around energized wire, apparatus, equipment, or third rail. True or False? - CORRECT ANSWER-False. [1.114] The Minimum Approach Distance for AMT-2 Qualified Employees whether or not protected by Class A employee against Transmission Wires energized or de-energized and not grounded is? - CORRECT ANSWER-8ft. [Table 1] What is the Minimum Approach Distance for AMT-2 Qualified Employee whether or not protected by a Class A employee against the Catenary, Signal Line, and Utility Wires less than 35000 volts, energized or de-energized and not grounded? - CORRECT ANSWER-3ft. [Table 1] What is the Minimum Approach Distance f