TCFP INSPECTOR'S CLASS II CORRECT
100%
Which of the following are a type of sprinkler?
A) ESFR
B) EC
C) AF
D) A and B - ANSWER A and B
Foam water system design and installation requirements are regulated by
___________.
A. NFPA 13
B. NFPA 13R
C. NFPA 25
D. NFPA 16 - ANSWER NFPA 16
True or False, NFPA 72 allows only manual pull stations and water flow detection
devices to be used on shunt systems. Fire detection devices are not permitted. -
ANSWER True
The fire alarm control panel (FACP) is essentially the _____ of the system. - ANSWER
Brain
Heat sensing fire detector color coding has a RED extra high temperature rating of?
A.) 0-99f
B.)175-249f
C.) 325-399f
D.) 500-575f - ANSWER 325-399f
According to NFPA, travel distances to a manual pull station should not exceed _____
feet.
A. 100
B. 200
C. 300
D. 400 - ANSWER 200
What color tag is used to indicate that an alarm system is impaired?
A. White
B. Yellow
C. Blue
D. Red - ANSWER Red
About _____ % of fire deaths are attributed to smoke inhalation and not to burns.
A. 55%
,B. 60%
C. 65%
D. 70% - ANSWER 65%
When performing maintenance inspections of occupancies with alarm systems, the first
step will be to:
A) Check for green light indicating normal operation
B) Confirm monitoring status with alarm company
C) Confirm panel is locked and inaccessible to public
D) Confirm system has been tested by licensed alarm contractor and has a current
inspection tag - ANSWER Confirm system has been tested by licensed alarm contractor
and has a current inspection tag
Most people are well aware of the dangers of fire but less aware of the dangers of
smoke inhalation. About ___% of of fire deaths are attributed to smoke inhalation and
not to burns.
A) 65
B) 80
C) 92
D) 75 - ANSWER 65
If required, pull stations should be placed within ___ feet of every exit.
a) 4
b) 5
c) 10
d) does not matter what distance, as long as it is not blocked - ANSWER 5
T or F: The development of clean-agent fire-extinguishing systems began in the late
1940s. - ANSWER True
NFPA 10 has assigned a maximum travel distance of __ feet from the hazard to a Class
K extinguisher?
A) 30
B) 50
C) 75
D) 100 - ANSWER 30
If an extinguisher is suitable for use on a particular class of fire, the picture-symbol
background is what color?
A.) Red
B.) Light Blue
C.) Black
D.) Grey - ANSWER Light Blue
Which one of the following is not considered a proper placement of a fire extinguisher?
A. Visible and marked with legible signage.
, B. Near Points of egress or ingress.
C. Sitting on top of a work bench with no mount.
D. Near formal paths of travel. - ANSWER Sitting on top of a work bench with no mount.
Foam extinguishes a fire by one or more of the four following methods except:
A. Smothering
B. Seperating
C. Suppressing
D. Blanketing - ANSWER Blanketing
In regards to carbon dioxide fire-extinguishing systems, total flooding systems are
designed to deliver at least ___ percent concentration of CO into and enclosed area.
A. 21
B. 19
C. 34
D. 15 - ANSWER 34
What is the fuel classification for combustible metals?
A. Class A
B. Class B
C. Class C
D. Class D - ANSWER Class D
Most fire-extinguishing foam concentrates in use today are of the _____ type, which
means they must be proportioned with water and mixed with air (aerated) before they
can be used.
A. mechanical
B. electrical
C. slippery
D. bubbly - ANSWER mechanical
A properly placed fire extinguisher will result in all of the following except:
A. Visible, signage not necessary
B. Not be blocked by storage or equipment
C. Near points of egress and ingress
D. Near normal paths of travel - ANSWER Visible, signage not necessary
A dry chemical extinguishing system is used wherever rapid fire extinguishment is
required and where ________ of the burning material is unlikely.
A) exploding
B) oxidation
C) smothering
D) reignition - ANSWER reignition
NFPA 10 establishes a Class B flammable liquid fire with depth at____
A. 1/2"
100%
Which of the following are a type of sprinkler?
A) ESFR
B) EC
C) AF
D) A and B - ANSWER A and B
Foam water system design and installation requirements are regulated by
___________.
A. NFPA 13
B. NFPA 13R
C. NFPA 25
D. NFPA 16 - ANSWER NFPA 16
True or False, NFPA 72 allows only manual pull stations and water flow detection
devices to be used on shunt systems. Fire detection devices are not permitted. -
ANSWER True
The fire alarm control panel (FACP) is essentially the _____ of the system. - ANSWER
Brain
Heat sensing fire detector color coding has a RED extra high temperature rating of?
A.) 0-99f
B.)175-249f
C.) 325-399f
D.) 500-575f - ANSWER 325-399f
According to NFPA, travel distances to a manual pull station should not exceed _____
feet.
A. 100
B. 200
C. 300
D. 400 - ANSWER 200
What color tag is used to indicate that an alarm system is impaired?
A. White
B. Yellow
C. Blue
D. Red - ANSWER Red
About _____ % of fire deaths are attributed to smoke inhalation and not to burns.
A. 55%
,B. 60%
C. 65%
D. 70% - ANSWER 65%
When performing maintenance inspections of occupancies with alarm systems, the first
step will be to:
A) Check for green light indicating normal operation
B) Confirm monitoring status with alarm company
C) Confirm panel is locked and inaccessible to public
D) Confirm system has been tested by licensed alarm contractor and has a current
inspection tag - ANSWER Confirm system has been tested by licensed alarm contractor
and has a current inspection tag
Most people are well aware of the dangers of fire but less aware of the dangers of
smoke inhalation. About ___% of of fire deaths are attributed to smoke inhalation and
not to burns.
A) 65
B) 80
C) 92
D) 75 - ANSWER 65
If required, pull stations should be placed within ___ feet of every exit.
a) 4
b) 5
c) 10
d) does not matter what distance, as long as it is not blocked - ANSWER 5
T or F: The development of clean-agent fire-extinguishing systems began in the late
1940s. - ANSWER True
NFPA 10 has assigned a maximum travel distance of __ feet from the hazard to a Class
K extinguisher?
A) 30
B) 50
C) 75
D) 100 - ANSWER 30
If an extinguisher is suitable for use on a particular class of fire, the picture-symbol
background is what color?
A.) Red
B.) Light Blue
C.) Black
D.) Grey - ANSWER Light Blue
Which one of the following is not considered a proper placement of a fire extinguisher?
A. Visible and marked with legible signage.
, B. Near Points of egress or ingress.
C. Sitting on top of a work bench with no mount.
D. Near formal paths of travel. - ANSWER Sitting on top of a work bench with no mount.
Foam extinguishes a fire by one or more of the four following methods except:
A. Smothering
B. Seperating
C. Suppressing
D. Blanketing - ANSWER Blanketing
In regards to carbon dioxide fire-extinguishing systems, total flooding systems are
designed to deliver at least ___ percent concentration of CO into and enclosed area.
A. 21
B. 19
C. 34
D. 15 - ANSWER 34
What is the fuel classification for combustible metals?
A. Class A
B. Class B
C. Class C
D. Class D - ANSWER Class D
Most fire-extinguishing foam concentrates in use today are of the _____ type, which
means they must be proportioned with water and mixed with air (aerated) before they
can be used.
A. mechanical
B. electrical
C. slippery
D. bubbly - ANSWER mechanical
A properly placed fire extinguisher will result in all of the following except:
A. Visible, signage not necessary
B. Not be blocked by storage or equipment
C. Near points of egress and ingress
D. Near normal paths of travel - ANSWER Visible, signage not necessary
A dry chemical extinguishing system is used wherever rapid fire extinguishment is
required and where ________ of the burning material is unlikely.
A) exploding
B) oxidation
C) smothering
D) reignition - ANSWER reignition
NFPA 10 establishes a Class B flammable liquid fire with depth at____
A. 1/2"
