Suspensi Guías de estudio, Notas de estudios & Resúmenes

The above alignment setting would results in which of following conditions - Answer-Right tire wear on the inside, vehicle pulls to the left Reason: the vehcile will always pill to the side with (+) camber A driver says that the front end of his car vibrates up-and-down while traveling at most road speeds . Technician A says that too much runout of the front wheels could be the cause. Technician B says that static out-of-balance of the front wheels could be the cause. Who is right ? - Answ...

Suspension & Steering Questions and Answers Already Passed Bleeding a power steering unit is generally done by turning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? Caster "Toe" adjustment on front wheel drive vehicles is made by: changing he length of the steering linkage When performing a front-end alignment what sh...

SOS Mechanic Certification- Suspension & Steering Questions and Answers 100% Pass Bleeding a power steering unit is generally done by turning the steering wheel left and right repeatedly After rounding a turn, the front wheels do not return to the straight ahead position in a normal way. What adjustment is most likely to be out of specifications? Caster "Toe" adjustment on front wheel drive vehicles is made by: changing he length of the steering linkage When performing a front-en...

A vehicle has excessive body sway while cornering. Which of these is most likely to cause this condition. A. A binding ball joint. B. A warn idler arm. C. Warn control arm bushings. D. Warn stabilizer bar bushings - Answer-D. Warn stabilizer bar bushings A vehicle with variable assist steering feels loose only at highway speeds. Technician A says this is likely caused by the vehicle speed sensor. Technician B says this could be caused by reduced pressure to the steering gear at high sp...

An owner of a power steering equipped car complains of a pull to the right. What could cause this? A. internal leakage in the steering gear control valve B.poor wheel alignment C. Low tire pressure D. All the above - Answer-D all the above A car with power rack and pinion steering has a shimmy. Tech A says that worn rack to frame mounting bushings could be the cause. Tech B says that dynamic tire balance could be the cause. Who is right? A. Tech a B. Tech B C. Both D. Neither - Answer...

The thrust angle on a front-wheel drive vehicle is more than specified, and the thrust line is positioned to the left of the geometric centerline. This problem could be caused by excessive: - Answer-toe-out on the left rear wheel. To remove the power steering pump, which procedure should be done first? - Answer-Loosen the belt tensioner. To ensure correct installation of a new manual rack and pinion steering gear, which procedure should be done? - Answer-Mark or note the relationship of th...

The front end of a vehicle vibrates up and down while traveling at most road speeds. Technician A says that too much radial runout of the front tires could be the cause. Technician B says that static out-of-balance of the front tires could be the cause. Who is right? (A) A only (B) B only (C) Both A and B (D) Neither A nor B - ANSWER-C. A vehicle wanders while being driven on level roads. Technician A says that too much negative camber could be the cause. Technician B says tha...

A vehicle's front wheels have excessive positive camber on one side and excessive negative camber on the other. Which of theses is MOST likely causing this condition? - Answer-The engine cradle has shifted Technician A says the (SAI) steering axis inclination is built-in by the manufacturer and not adjustable. Technician B says SAI and the caster angle affect steering wheel return to center. Who is correct? - Answer-Both A and B The compressor of an air suspension system runs continuously...

Worn steering column bearings or loose mounts can cause - Answer- Noise or looseness in the steering column A broken support plate or other worn internal column parts can cause - Answer- Looseness or binding in the steering column In a tilt steering column, worn or loose pivots will cause the - Answer- Steering wheel to have excessive movement Check U-Joints for - Answer- Wear, looseness, and binding. Steps on working with airbag - Answer- 1.Always disable the airbag system before se...

SOS Mechanic Certification Exam Suspension and Steering, Brakes and Engine repair Exam New 2024 Latest Version