EPA 608 Study guides, Study notes & Summaries

EPA 608 Type III Accurate Questions & Answers!!EPA 608 Type III Accurate Questions & Answers!! How is frost best removed from a sight glass? What do R-11 and R-123 refrigerants have in common? A. They are oxygen depleting B. They are Class I and II substances as defined by the EPA C. Both A and B D. Neither A nor B - ANSWER C. Both A and B What is the required evacuation level for recovering refrigerant from a low-pressure appliance with a recovery machine manufactured before Novemb...

EPA 608 Type 3 Accurate Questions & Ansewers!!On low pressure chillers, moisture typically enters the refrigerant system through - ANSWER air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: - ANSWER 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller - ANSWER ... A hydrostatic tube test kit is used to: - ANSWER determine if a tube leaks Commercial and industrial pro...

What do R-11 and R-123 refrigerants have in common? A. They are oxygen depleting B. They are Class I and II substances as defined by the EPA C. Both A and B D. Neither A nor B - ANSWER C. Both A and B What is the required evacuation level for recovering refrigerant from a low-pressure appliance with a recovery machine manufactured before November 15, 1993? A. 0 psig B. 4" Hg C. 10 A Hg D. 25" Hg - ANSWER D. 25" Hg How is frost best removed from a sight glass? A. reverse ...

Are there drop-in replacements for R-12 systems? Why or why not? - ANSWER No because the new refrigerants are incompatible with the oils and lubricants used in R-12 systems. What type of oil is used in R-134a and what oils will it mix with? - ANSWER Ester based oils and they do not mix with other oils What type of lubricant is used with HCFCs? - ANSWER Alkylbenzene lubricant What is difference b/w ternary blend a azeotropic blend? - ANSWER Ternary blends are three-part mixtures whereas ...

What is typically used on small appliances as a service aperture or other device for adding or removing refrigerant? a. A straight piece of tubing that is entered using a piercing access tube. b. A line located 15 inches below the compressor. c. A valve installed at the factory which has a ¼ inch diameter and machine threads. d. A service aperture is not present because small appliances are exempt from this requirement. - ANSWER a. A straight piece of tubing that is entered using a piercing...

What do R-11 and R-123 refrigerants have in common? A. They are oxygen depleting B. They are Class I and II substances as defined by the EPA C. Both A and B D. Neither A nor B - ANSWER C. Both A and B What is the required evacuation level for recovering refrigerant from a low-pressure appliance with a recovery machine manufactured before November 15, 1993? A. 0 psig B. 4" Hg C. 10 A Hg D. 25" Hg - ANSWER D. 25" Hg How is frost best removed from a sight glass? A. reverse ...

On low pressure chillers, moisture typically enters the refrigerant system through - ANSWER air leaks from areas with gaskets or fittings The maximum test pressure for leak testing a low pressure centrifugal is: - ANSWER 10 psig Leak test and repair the chiller to reduce refrigerant loss from a pruge unit on CFC-11 chiller - ANSWER ... A hydrostatic tube test kit is used to: - ANSWER determine if a tube leaks Commercial and industrial process refrigeration systems must be repaired wh...

EPA 608 Certification, questions with correct answers _ 100% Excel A+ Graded Updated EPA 608 November 14, 1994 - CORRECT ANSWER-What date was the sale of CFC's & HCFC's restricted to technicians certified in refrigerant recovery? Memorize it, ya'll. - CORRECT ANSWER-1987- Montreal Protocol July 1 1992- Violation to vent CFCs or HCFCs Nov 15 1993- Recovery/Recycling equipment must be certified and labeled by EPA AND Before this date recovery equipment needed to be capable ...

EPA 608 Certification, EPA 608 Questions and Answers Updated For Excel a 100% A+ Graded November 14, 1994 - ANS-What date was the sale of CFC's & HCFC's restricted to technicians certified in refrigerant recovery? Memorize it, ya'll. - ANS-1987- Montreal Protocol July 1 1992- Violation to vent CFCs or HCFCs Nov 15 1993- Recovery/Recycling equipment must be certified and labeled by EPA AND Before this date recovery equipment needed to be capable of removing 80% of the refr...

EPA 608 Core Test Exam with Updated Sample Questions and Correct Answers 100% A+ As of what date did it become unlawful to release Class 1 and Class II refrigerants to the atmosphere? a. July 1, 1992 b. July 1, 1993 c. November 14, 1994 d. January 1, 1996 - CORRECT ANSWER-a. July 1, 1992 What is the ozone layer and why is it important to us on Earth? a. Thin layer of R-22 in the atmosphere that filters UV. b. Protective shield for Earth from the sun's harmful ultraviolent (UV) ra...