AUT - 119 Final Exam || A+ Guaranteed.
A vehicle is towed into the shop with a thrown serpentine belt. Technician A checks for a
worn pulley bearing. Technician B checks for a faulty tensioner. Who is correct? correct
answers both
Two technicians are discussing the proper coolant to use on a late model GM vehicle.
Technician A says that "DEXCOOL" type Organic Acid Technology [OAT] is the proper
coolant to use. Technician B says that Ethylene Glycol [good old green] type antifreeze can
be used on any vehicle. Who is correct? correct answers a only
A battery hydrometer is used to measure the specific gravity of the electrolyte. correct
answers true
Forces can be _____. correct answers all
A 3/8 inch UNC bolt is being discussed. Technician A says that the bolt diameter is 3/8 inch
and that it has 16 threads per inch. Technician B says that the bolt meets the measurement
standards developed by the University of North Carolina. Who is correct? correct answers a
only
Henry Ford's factory was the first to produce automobiles for sale to the public. correct
answers false
When ice is warmed to 32°F, the heat needed to convert the ice into water that does not raise
the temperature of the water is called _____ heat. correct answers latent
ASE certified technicians must be retested every _____ years to remain certified. correct
answers five
Repair work performed on vehicles still under the manufacturer's warranty is usually
performed by ______. correct answers dealerships
CAFE refers to "car average federal emissions." correct answers false
Technician A says V-belts are manually tensioned and require periodic adjustment.
Technician B says serpentine belts are normally automatically adjusted. Who is correct?
correct answers both
Résumés are being discussed. Technician A says it is best to drop off a résumé in person.
Technician B says to callback after three days to make sure they received it. Who is correct?
correct answers a only
A straightedge and feeler gauge are used to measure _____. correct answers warpage
Critical thinking is being discussed. Technician A says it is a way to evaluate something with
bias. Technician B says good critical thinkers begin the process of problem solving by
observation. Who is correct? correct answers b only
A vehicle is towed into the shop with a thrown serpentine belt. Technician A checks for a
worn pulley bearing. Technician B checks for a faulty tensioner. Who is correct? correct
answers both
Two technicians are discussing the proper coolant to use on a late model GM vehicle.
Technician A says that "DEXCOOL" type Organic Acid Technology [OAT] is the proper
coolant to use. Technician B says that Ethylene Glycol [good old green] type antifreeze can
be used on any vehicle. Who is correct? correct answers a only
A battery hydrometer is used to measure the specific gravity of the electrolyte. correct
answers true
Forces can be _____. correct answers all
A 3/8 inch UNC bolt is being discussed. Technician A says that the bolt diameter is 3/8 inch
and that it has 16 threads per inch. Technician B says that the bolt meets the measurement
standards developed by the University of North Carolina. Who is correct? correct answers a
only
Henry Ford's factory was the first to produce automobiles for sale to the public. correct
answers false
When ice is warmed to 32°F, the heat needed to convert the ice into water that does not raise
the temperature of the water is called _____ heat. correct answers latent
ASE certified technicians must be retested every _____ years to remain certified. correct
answers five
Repair work performed on vehicles still under the manufacturer's warranty is usually
performed by ______. correct answers dealerships
CAFE refers to "car average federal emissions." correct answers false
Technician A says V-belts are manually tensioned and require periodic adjustment.
Technician B says serpentine belts are normally automatically adjusted. Who is correct?
correct answers both
Résumés are being discussed. Technician A says it is best to drop off a résumé in person.
Technician B says to callback after three days to make sure they received it. Who is correct?
correct answers a only
A straightedge and feeler gauge are used to measure _____. correct answers warpage
Critical thinking is being discussed. Technician A says it is a way to evaluate something with
bias. Technician B says good critical thinkers begin the process of problem solving by
observation. Who is correct? correct answers b only
