RCO final questions with accurate answers
10. The RCO begins hearing a steady clicking sound from the OCU after
remaining in 7 mph for
50 seconds. How should the RCO respond? Ans✓✓✓ full app
15. How many seconds does the secondary RCO have to accept the
pitch? Ans✓✓✓ 10 seconds
16. If the primary RCO sends a pitch in error, how could the primary
RCO prevent control from
ni/035
being transferred? Ans✓✓✓ don't except it
2. When the secondary operator places the OCU into emergency, who
must perform the recovery procedure? Ans✓✓✓ both, sec then primary
38. Which documents must be checked to obtain a listing of designated
remote control
locations? Ans✓✓✓ timetable
44. How many seconds stop command?
or inactivity may pass before the vigilance timeout feature will send a
Ans✓✓✓ 60
, 51. What item identifies the RCO in control of the locomotive?
Ans✓✓✓ the box says primary
63. What test must be performed hands free when taking control of a
linked OCU? Ans✓✓✓ Attachment test
9. Which OCU component will allow the RCO to send an emergency
stop command to the RCL? Ans✓✓✓ ind
Before moving, the primary RCO should check what on the RCT?
Ans✓✓✓ direction and air
How can a RCO determine if the pitch was successful? Ans✓✓✓ says
pitch on the box
How does the secondary RCO accept the pitch? Ans✓✓✓ pres the vig
button
How is an attachment test performed? Ans✓✓✓ tilting 45 degrees
How long can the RCO operate with a medium set on the automatic
brakes before receiving a dragging brake fault? Ans✓✓✓ 20 miles but
not over a switch or frog
How long will pressing the SI/TOR switch extend the tilt time for the
primary RCO while the locomotive is moving? Ans✓✓✓ 15 secs
10. The RCO begins hearing a steady clicking sound from the OCU after
remaining in 7 mph for
50 seconds. How should the RCO respond? Ans✓✓✓ full app
15. How many seconds does the secondary RCO have to accept the
pitch? Ans✓✓✓ 10 seconds
16. If the primary RCO sends a pitch in error, how could the primary
RCO prevent control from
ni/035
being transferred? Ans✓✓✓ don't except it
2. When the secondary operator places the OCU into emergency, who
must perform the recovery procedure? Ans✓✓✓ both, sec then primary
38. Which documents must be checked to obtain a listing of designated
remote control
locations? Ans✓✓✓ timetable
44. How many seconds stop command?
or inactivity may pass before the vigilance timeout feature will send a
Ans✓✓✓ 60
, 51. What item identifies the RCO in control of the locomotive?
Ans✓✓✓ the box says primary
63. What test must be performed hands free when taking control of a
linked OCU? Ans✓✓✓ Attachment test
9. Which OCU component will allow the RCO to send an emergency
stop command to the RCL? Ans✓✓✓ ind
Before moving, the primary RCO should check what on the RCT?
Ans✓✓✓ direction and air
How can a RCO determine if the pitch was successful? Ans✓✓✓ says
pitch on the box
How does the secondary RCO accept the pitch? Ans✓✓✓ pres the vig
button
How is an attachment test performed? Ans✓✓✓ tilting 45 degrees
How long can the RCO operate with a medium set on the automatic
brakes before receiving a dragging brake fault? Ans✓✓✓ 20 miles but
not over a switch or frog
How long will pressing the SI/TOR switch extend the tilt time for the
primary RCO while the locomotive is moving? Ans✓✓✓ 15 secs
