SENSE Level 1 Welding Process Certification Test Module 4: SMAW |28 Exam Questions with Answers

SENSE Level 1 Welding Process
Certification Test Module 4: SMAW |
28 Exam Questions with Answers
The distance from the molten tip of the SMAW electrode to the surface of the
molten weld pool should be - -One electrode diameter

- Which of the following is an INCORRECT statement about an E7018
electrode? - -They are suitable for flat position and horizontal fillet only

- Of the following, which is NOT a requirement for the SMAW process? - -Gas
supply

- Which of the following electrodes would you select to produce a weld with
shallow penetration? - -E6013

- Which one of the following electrodes is NOT suitable for use in all
positions? - -E7018

- An engine-driven generator WITHOUT a rectifier produces what form of
welding current? - -AC only

- Which group of electrodes is low hydrogen type? - -E7015, E7016 and
E7018

- Which of the following cable sizes is the largest? - -# 2/0

- When the welding machine is set to DCEP, current flows - -From the work
to the electrode

- "Arc blow" is caused by - -Magnetic forces associated with direct current

- "Duty cycle" is a term used to indicate the - -Percentage of time in a 10
minute period a machine can operate at rated output

- Rectifiers are noted for their ability to - -Change AC to DC

- In North America, alternating current changes direction - -120 times per
second

- The last digit in the electrode classification E7018 indicates - -Type of
current and electrode coating