Automotive Technology ASE Test Questions with
Correct Answers.
Tire pressure on a passenger vehicle is being checked and adjusted at ambient
temperature
technician A says that correct tire inflation pressure for the vehicle may be found on a
placard on the driver's door
technician B says that correct tire inflation pressure for the vehicle may be found on the
markings on the tire sidewall. - Correct answer-Technician A
a vehicle's battery prematurely fails. A charging system output test shows the generator
(alternator) is producing a constant 16.0 volts. this could indicate a failed - Correct
answer-a. voltage regulator
which of these sealers cures in the absence of air? - Correct answer-a. anaerobic
technician A says that, when reinstalling a wheel and tire assembly on a vehicle, the lug
nuts should be tightened using a torque wrench.
technician B says that, when reinstalling a wheel and tire assembly on a vehicle, the lug
nuts should be tightened in a circular pattern - Correct answer-a. a only
After a coolant thermostat replacement, the engine overheats. this could be caused by: -
Correct answer-d. air in the cooling system
The following question contains the word EXCEPT. Read the question carefully and look
for the choice that could not cause the described situation.
A grabbing brake condition can be caused by any of these EXCEPT: - Correct answer-a. a
failed brake booster
technician A says that a positive crankcase ventilation ( PCV ) system reduces vehicle
emissions.
Correct Answers.
Tire pressure on a passenger vehicle is being checked and adjusted at ambient
temperature
technician A says that correct tire inflation pressure for the vehicle may be found on a
placard on the driver's door
technician B says that correct tire inflation pressure for the vehicle may be found on the
markings on the tire sidewall. - Correct answer-Technician A
a vehicle's battery prematurely fails. A charging system output test shows the generator
(alternator) is producing a constant 16.0 volts. this could indicate a failed - Correct
answer-a. voltage regulator
which of these sealers cures in the absence of air? - Correct answer-a. anaerobic
technician A says that, when reinstalling a wheel and tire assembly on a vehicle, the lug
nuts should be tightened using a torque wrench.
technician B says that, when reinstalling a wheel and tire assembly on a vehicle, the lug
nuts should be tightened in a circular pattern - Correct answer-a. a only
After a coolant thermostat replacement, the engine overheats. this could be caused by: -
Correct answer-d. air in the cooling system
The following question contains the word EXCEPT. Read the question carefully and look
for the choice that could not cause the described situation.
A grabbing brake condition can be caused by any of these EXCEPT: - Correct answer-a. a
failed brake booster
technician A says that a positive crankcase ventilation ( PCV ) system reduces vehicle
emissions.
