JOURNEYMAN OIL BURNER EXAM SOLVED #9
When a new burner is installed, what wiring must also be updated? - correct answer
Breaker, properly rated wiring, properly installed and located emergency switch,
properly installed and located thermal electric switch, properly installed and located
service switch and properly installed and located low water cut off
How long is an emergency replacement chimney forum good for and who's
responsibility is it to see that it is replaced - correct answer 90 days and the licensees
What needs to be preformed before all new installations? - correct answer Heat lost
system design and system load calculations
A fill pipe should be how many feet from any building opening - correct answer 2'
Who shall be consulted before welding a heat exchanger? - correct answer The
Manufacturer
A master or journeyman plumber shall not - correct answer Pipe an oil tank, install any
electrical wiring unless licensed, install safety equipment, install any portion of the
venting system, install thermostats and relays
A master or journeyman plumber shall - correct answer Radiation, supply mains, valves
etc, connect supplies and returns to boilers, connect make-up water to boiler, install
back flo preventer, connect domestic water piping to tank-less indirect or direct fire
water heater
A master or journeyman Oil Tech may do what electrical items? - correct answer Install,
branch circuit, fittings, devices and raceways for powering oil, solid fuel and propane or
natural gas systems as well as motors or controls.
A master or journeyman oil tech may not do what electrical item? - correct answer
Install a kickspace heater
- correct answer
When a new burner is installed, what wiring must also be updated? - correct answer
Breaker, properly rated wiring, properly installed and located emergency switch,
properly installed and located thermal electric switch, properly installed and located
service switch and properly installed and located low water cut off
How long is an emergency replacement chimney forum good for and who's
responsibility is it to see that it is replaced - correct answer 90 days and the licensees
What needs to be preformed before all new installations? - correct answer Heat lost
system design and system load calculations
A fill pipe should be how many feet from any building opening - correct answer 2'
Who shall be consulted before welding a heat exchanger? - correct answer The
Manufacturer
A master or journeyman plumber shall not - correct answer Pipe an oil tank, install any
electrical wiring unless licensed, install safety equipment, install any portion of the
venting system, install thermostats and relays
A master or journeyman plumber shall - correct answer Radiation, supply mains, valves
etc, connect supplies and returns to boilers, connect make-up water to boiler, install
back flo preventer, connect domestic water piping to tank-less indirect or direct fire
water heater
A master or journeyman Oil Tech may do what electrical items? - correct answer Install,
branch circuit, fittings, devices and raceways for powering oil, solid fuel and propane or
natural gas systems as well as motors or controls.
A master or journeyman oil tech may not do what electrical item? - correct answer
Install a kickspace heater
- correct answer
