NATE HEAT PUMP PREP EXAM |ACTUAL
QUESTIONS AND VERIFIED ANSWERS|BRAND NEW
2026-2027 UPDATE|GRADED A+
Question 1
Charging a heat pump with refrigerant is best accomplished in the _______ mode.
A: Heating mode
B: Cooling mode
C: Defrost mode
D: Emergency heating mode
CORRECT ANSWER
B: Cooling mode
Question 2
Heat pumps can provide both heating in the winter and cooling in the summer. In which
mode is the heat pump more efficient?
A: Heating mode
B: Cooling mode
C: Defrost mode
1
,D: Emergency heating mode
CORRECT ANSWER
A: Heating mode
Question 3
Which of the following components is exclusive to the heat pump?
A: Condenser
B: Oil separator
C: Reversing valve
D: Accumulator
CORRECT ANSWER
C: Reversing valve
Question 4
Which of the following airflow rates is the most reasonable for a heat pump system
operating in the heating cycle?
A: 200 cfm per ton
B: 300 cfm per ton
2
, C: 400 cfm per ton
D: 450 cfm per ton
CORRECT ANSWER
D: 450 cfm per ton
Question 5
During the heat pump's cooling cycle, the outdoor coil is utilized as a _________ while the
indoor coil is utilized as a____________.
A: Condenser, evaporator
B: Evaporator, condenser
C: Compressor, accumulator
D: Accumulator, condenser
CORRECT ANSWER
A: Condenser, evaporator
Question 6
Heat is present in winter outdoor air until the outside air ambient temperature reaches a
low temperature of:
A: 0 degrees F
3
QUESTIONS AND VERIFIED ANSWERS|BRAND NEW
2026-2027 UPDATE|GRADED A+
Question 1
Charging a heat pump with refrigerant is best accomplished in the _______ mode.
A: Heating mode
B: Cooling mode
C: Defrost mode
D: Emergency heating mode
CORRECT ANSWER
B: Cooling mode
Question 2
Heat pumps can provide both heating in the winter and cooling in the summer. In which
mode is the heat pump more efficient?
A: Heating mode
B: Cooling mode
C: Defrost mode
1
,D: Emergency heating mode
CORRECT ANSWER
A: Heating mode
Question 3
Which of the following components is exclusive to the heat pump?
A: Condenser
B: Oil separator
C: Reversing valve
D: Accumulator
CORRECT ANSWER
C: Reversing valve
Question 4
Which of the following airflow rates is the most reasonable for a heat pump system
operating in the heating cycle?
A: 200 cfm per ton
B: 300 cfm per ton
2
, C: 400 cfm per ton
D: 450 cfm per ton
CORRECT ANSWER
D: 450 cfm per ton
Question 5
During the heat pump's cooling cycle, the outdoor coil is utilized as a _________ while the
indoor coil is utilized as a____________.
A: Condenser, evaporator
B: Evaporator, condenser
C: Compressor, accumulator
D: Accumulator, condenser
CORRECT ANSWER
A: Condenser, evaporator
Question 6
Heat is present in winter outdoor air until the outside air ambient temperature reaches a
low temperature of:
A: 0 degrees F
3