Texas State Fire Marshal TFM02 EXT Type B Fire
Extinguisher Technician License Exam | Latest Update
2026/2027 | 200 Practice Questions & Detailed Answers
| Pass Guarantee A+ Graded
1. What does the acronym PASS stand for when using a fire extinguisher?
A. Pull, Aim, Squeeze, Sweep
B. Point, Aim, Shoot, Stop
C. Push, Alert, Spray, Secure
D. Pull, Alert, Squeeze, Stop
Answer: A
Explanation: PASS is the standard operating procedure for fire extinguisher use: Pull the pin, Aim at the
base of the fire, Squeeze the handle, and Sweep side to side.
2. Which NFPA standard is specifically identified by the Texas State Fire Marshal's Office as the technical
basis for the TFM02 test?
A. NFPA 72
B. NFPA 13
C. NFPA 10
D. NFPA 25
Answer: C
Explanation: The TFM02 Type B exam is based on NFPA 10, Standard for Portable Fire Extinguishers,
which governs selection, installation, inspection, maintenance, and testing.
,3. Class B fires involve which type of material?
A. Wood, paper, and textiles
B. Flammable liquids and gases
C. Energized electrical equipment
D. Cooking oils and greases
Answer: B
Explanation: Class B fires involve flammable liquids such as gasoline, oil, paint, and flammable gases.
4. What is the minimum passing score for the TFM02 Type B license test in Texas?
A. 60%
B. 65%
C. 70%
D. 75%
Answer: C
Explanation: Per 28 TAC §34.516, applicants must obtain a grade of at least 70 percent on the test.
5. Which of the following is NOT an approved extinguishing agent for Class B fires?
,A. Carbon dioxide (CO₂)
B. Aqueous film forming foam (AFFF)
C. Water
D. Dry chemical
Answer: C
Explanation: Water is not approved for Class B fires as it can spread flammable liquids. Approved agents
include CO₂, dry chemical, foam, AFFF, FFFP, and halogenated agents.
6. How often must storedpressure dry chemical extinguishers be internally examined?
A. Every year
B. Every 3 years
C. Every 6 years
D. Every 12 years
Answer: C
Explanation: NFPA 10 requires that storedpressure dry chemical extinguishers undergo internal
examination (teardown) every 6 years.
7. What is the maximum travel distance to a Class B fire extinguisher for a light hazard occupancy?
A. 30 feet
B. 50 feet
C. 75 feet
, D. 100 feet
Answer: B
Explanation: NFPA 10 specifies a maximum travel distance of 50 feet for Class B hazards, though this
may vary based on hazard classification.
8. How often must CO₂ fire extinguishers be hydrostatically tested?
A. Every 3 years
B. Every 5 years
C. Every 10 years
D. Every 12 years
Answer: B
Explanation: Carbon dioxide extinguishers must be hydrostatically tested every 5 years per NFPA 10.
9. What does a "10B" rating on a fire extinguisher indicate?
A. It can extinguish 10 square feet of Class B fire
B. It contains 10 pounds of agent
C. It is rated for 10 square feet of Class A fire
D. It has a 10second discharge time
Answer: A
Extinguisher Technician License Exam | Latest Update
2026/2027 | 200 Practice Questions & Detailed Answers
| Pass Guarantee A+ Graded
1. What does the acronym PASS stand for when using a fire extinguisher?
A. Pull, Aim, Squeeze, Sweep
B. Point, Aim, Shoot, Stop
C. Push, Alert, Spray, Secure
D. Pull, Alert, Squeeze, Stop
Answer: A
Explanation: PASS is the standard operating procedure for fire extinguisher use: Pull the pin, Aim at the
base of the fire, Squeeze the handle, and Sweep side to side.
2. Which NFPA standard is specifically identified by the Texas State Fire Marshal's Office as the technical
basis for the TFM02 test?
A. NFPA 72
B. NFPA 13
C. NFPA 10
D. NFPA 25
Answer: C
Explanation: The TFM02 Type B exam is based on NFPA 10, Standard for Portable Fire Extinguishers,
which governs selection, installation, inspection, maintenance, and testing.
,3. Class B fires involve which type of material?
A. Wood, paper, and textiles
B. Flammable liquids and gases
C. Energized electrical equipment
D. Cooking oils and greases
Answer: B
Explanation: Class B fires involve flammable liquids such as gasoline, oil, paint, and flammable gases.
4. What is the minimum passing score for the TFM02 Type B license test in Texas?
A. 60%
B. 65%
C. 70%
D. 75%
Answer: C
Explanation: Per 28 TAC §34.516, applicants must obtain a grade of at least 70 percent on the test.
5. Which of the following is NOT an approved extinguishing agent for Class B fires?
,A. Carbon dioxide (CO₂)
B. Aqueous film forming foam (AFFF)
C. Water
D. Dry chemical
Answer: C
Explanation: Water is not approved for Class B fires as it can spread flammable liquids. Approved agents
include CO₂, dry chemical, foam, AFFF, FFFP, and halogenated agents.
6. How often must storedpressure dry chemical extinguishers be internally examined?
A. Every year
B. Every 3 years
C. Every 6 years
D. Every 12 years
Answer: C
Explanation: NFPA 10 requires that storedpressure dry chemical extinguishers undergo internal
examination (teardown) every 6 years.
7. What is the maximum travel distance to a Class B fire extinguisher for a light hazard occupancy?
A. 30 feet
B. 50 feet
C. 75 feet
, D. 100 feet
Answer: B
Explanation: NFPA 10 specifies a maximum travel distance of 50 feet for Class B hazards, though this
may vary based on hazard classification.
8. How often must CO₂ fire extinguishers be hydrostatically tested?
A. Every 3 years
B. Every 5 years
C. Every 10 years
D. Every 12 years
Answer: B
Explanation: Carbon dioxide extinguishers must be hydrostatically tested every 5 years per NFPA 10.
9. What does a "10B" rating on a fire extinguisher indicate?
A. It can extinguish 10 square feet of Class B fire
B. It contains 10 pounds of agent
C. It is rated for 10 square feet of Class A fire
D. It has a 10second discharge time
Answer: A
