ABO Exam Practice Assessment 2 with all Correct & 100%
Verified Answers |Actual Complete Update |Already Graded A+
1. A -5.00 diopter lens decentered 2mm too far tempo- 1 Diopter of
base in Prism
rally creates
2. A Patient steps into your dispensary for a frame Bend the right
temple up-
adjustment. After careful inspection, you determine ward
that the right side of the frame is sitting
high on the patient's face. To make the
necessary correcting adjustment, what
should you do?
3. Which of the following is an advantage of Proprion- Propionate is less
sensitive to
ate as a frame material warm weather
4. Accommodation is defined as The act of the crystalline
lens changing its shape
to focus for objects at
varying distance
5. If the right temple is angled out, this adjustment will Bring the right
side of the
front toward the right eye
6. When light entering the eye, without condition
corrective lenses, comes to a focus in front would be
of the retina, the patient's refractive error
is 9. The Target
cannot be
7. The nanometer range of visible light is perfectly
generally regarded to be centered
with the
8. If the top of the front is pressing against the lensometer.
brow, the adjustment to correct the This
1/
30
, ABO Exam Practice Assessment 2 with all Correct & 100%
Verified Answers |Actual Complete Update |Already Graded A+
indicates.... Myopia
380nm-700nm
Lengthen the pad arms
Aberration on the lens
surface
10. The major disadvantage of titanium Cost to manufacture
2/
30
, ABO Exam Practice Assessment 2 with all Correct & 100%
Verified Answers |Actual Complete Update |Already Graded A+
11. What material is lighter than titanium and
Scandium
can be used for designing frames without
soldering and welding?
12. Function of the Lens Holder to hold the lens in
place against the
lens stop
13. Multiple anti-reflective layers are necessary to... include multiple
light wave-
lengths
14. Another Name for the Focusing Screen Reticle
of the Lensometer
15. provides nutrition for outer
Choroid
layers of retina
16. A benefit inherent to polycarbonate as a material low specific gravity
17. During Frame Adjustment, the front can be Lowered spreading the
pads further
by apart
18. A Set of Curve that will yield a +4.00 diopter power +8.00 base
curve/-4.00 back
curve
19. Premium AR lenses transmit up to of 99%
light so patients see more clearly and
experience less fatigue
20. Plus lenses have a Real focal point
21. If the right temple is angled up the effect on will be
the frame, the resulting effect on the fit
3/
30
Verified Answers |Actual Complete Update |Already Graded A+
1. A -5.00 diopter lens decentered 2mm too far tempo- 1 Diopter of
base in Prism
rally creates
2. A Patient steps into your dispensary for a frame Bend the right
temple up-
adjustment. After careful inspection, you determine ward
that the right side of the frame is sitting
high on the patient's face. To make the
necessary correcting adjustment, what
should you do?
3. Which of the following is an advantage of Proprion- Propionate is less
sensitive to
ate as a frame material warm weather
4. Accommodation is defined as The act of the crystalline
lens changing its shape
to focus for objects at
varying distance
5. If the right temple is angled out, this adjustment will Bring the right
side of the
front toward the right eye
6. When light entering the eye, without condition
corrective lenses, comes to a focus in front would be
of the retina, the patient's refractive error
is 9. The Target
cannot be
7. The nanometer range of visible light is perfectly
generally regarded to be centered
with the
8. If the top of the front is pressing against the lensometer.
brow, the adjustment to correct the This
1/
30
, ABO Exam Practice Assessment 2 with all Correct & 100%
Verified Answers |Actual Complete Update |Already Graded A+
indicates.... Myopia
380nm-700nm
Lengthen the pad arms
Aberration on the lens
surface
10. The major disadvantage of titanium Cost to manufacture
2/
30
, ABO Exam Practice Assessment 2 with all Correct & 100%
Verified Answers |Actual Complete Update |Already Graded A+
11. What material is lighter than titanium and
Scandium
can be used for designing frames without
soldering and welding?
12. Function of the Lens Holder to hold the lens in
place against the
lens stop
13. Multiple anti-reflective layers are necessary to... include multiple
light wave-
lengths
14. Another Name for the Focusing Screen Reticle
of the Lensometer
15. provides nutrition for outer
Choroid
layers of retina
16. A benefit inherent to polycarbonate as a material low specific gravity
17. During Frame Adjustment, the front can be Lowered spreading the
pads further
by apart
18. A Set of Curve that will yield a +4.00 diopter power +8.00 base
curve/-4.00 back
curve
19. Premium AR lenses transmit up to of 99%
light so patients see more clearly and
experience less fatigue
20. Plus lenses have a Real focal point
21. If the right temple is angled up the effect on will be
the frame, the resulting effect on the fit
3/
30
