ABO Supplementary Questions with all Correct & 100%
Verified Answers |Latest Version |Already Graded A+
After considering several options your patient has decided on a frame with the following
dimensions:
A= 54mm B=50mm C=51.5 DBL= 18mm
If the segment is dropped 5 mm below the datum line, what is the seg height ✔Correct
Answer-20mm
The geometrical center distance of the frame
A= 54mm B=50mm C=51.5 DBL= 18mm
is ✔Correct Answer-72mm
The frame difference of
A= 54mm B=50mm C=51.5 DBL= 18mm ✔Correct Answer-4mm
You are presented with the following RX
OD -950 -125 x005
OS -925 175 x 175
During the frame selection process, which of the following should be recommended
1 Frame which require a great deal of decentration
2 Frames with smaller eye sizes
3 Frames with thinner rims
4 Frames in which the eyewire contains rounded corners ✔Correct Answer-2&4 only
During the frame selection process, some people seem to look fine in almost any frame they
select. When this occurs the shape of the face is most likely ✔Correct Answer-oval shaped
the appropriate frame selection for a patient with a wider face would be ✔Correct Answer-
one with a large frame difference between the horizontal and vertical measurements
When fitting a patient with an inverted (base up) triangular face, it is best to select a frame that
1. emphasizes the wider upper facial area
2. is darker in color
3. In lightweight and unobtrusive as possible
4. Has a rounded lens shape ✔Correct Answer-3 only
When fitting the aphakic patient with spectacles which of the following should be avoided
- library temples
-smaller lens sizes
- Smaller vertex distances
-large soft pads ✔Correct Answer-smaller lens sizes
Verified Answers |Latest Version |Already Graded A+
After considering several options your patient has decided on a frame with the following
dimensions:
A= 54mm B=50mm C=51.5 DBL= 18mm
If the segment is dropped 5 mm below the datum line, what is the seg height ✔Correct
Answer-20mm
The geometrical center distance of the frame
A= 54mm B=50mm C=51.5 DBL= 18mm
is ✔Correct Answer-72mm
The frame difference of
A= 54mm B=50mm C=51.5 DBL= 18mm ✔Correct Answer-4mm
You are presented with the following RX
OD -950 -125 x005
OS -925 175 x 175
During the frame selection process, which of the following should be recommended
1 Frame which require a great deal of decentration
2 Frames with smaller eye sizes
3 Frames with thinner rims
4 Frames in which the eyewire contains rounded corners ✔Correct Answer-2&4 only
During the frame selection process, some people seem to look fine in almost any frame they
select. When this occurs the shape of the face is most likely ✔Correct Answer-oval shaped
the appropriate frame selection for a patient with a wider face would be ✔Correct Answer-
one with a large frame difference between the horizontal and vertical measurements
When fitting a patient with an inverted (base up) triangular face, it is best to select a frame that
1. emphasizes the wider upper facial area
2. is darker in color
3. In lightweight and unobtrusive as possible
4. Has a rounded lens shape ✔Correct Answer-3 only
When fitting the aphakic patient with spectacles which of the following should be avoided
- library temples
-smaller lens sizes
- Smaller vertex distances
-large soft pads ✔Correct Answer-smaller lens sizes
