Med Gas Mock Exam | Verified Exam Questions and Answers | Latest
Updated Study Material 2026
Question:
Instrument air systems interconnection is prohibited
Answer:
shall be permitted to
interconnect with the
medical air system
provided the system
has
Question:
The scale range of 2/3
Answer:
positive pressure
analog indicators shall
have the normal
reading fall within the
percenta
ge of the gauge scale
What does it mean They are identified and published by an
when equipment, organization that is acceptable to the
material, or services are authority having jurisdiction.
shown as "listed"?
Fittings, valves, and Delivered sealed, labeled, and kept sealed.
other components for
oxygen use in a
Category 1
distribution system
shall be until
prepared for
installation.
Installers of Category 1 6010
medical gas piping
systems must be
qualified to ASSE 6010.
What is the
certification
requirement for
,installers of a
Category 3 system?
Question:
Metallic flexible joints B.)Suitable for service at 150 psig or above.
Answer:
are being used in the
pipeline for vibration
control. Which of the
following is NOT
required of such joints?
Question:
A.) Recieved on
Answer:
the jobsite with
certification of
cleanliness
B.) Suitable for service at
150 psig or above
C.) Provided with
extensions for brazing
D.) Able to withstand
1000?F
NFPA 99 specifies C.) combustible liquids
that the medical gas
system shall be
protected against
all EXCEPT which of
the following?
Question:
A.) Physical damage
Answer:
B.) Freezing
C.) combustible liquids
D.) Corrosion
A signal from each local alarm
system shall be
connected to the
, master alarm panels to
indicate that a
problem is present with
the source
Question:
equipment.
Answer:
Question:
Where existing, the reserve supply
Answer:
portion of the supply
equipment that
automatically supplies
the system when the
primary and
secondary are
unable.
Which of these D.) Testing a system component with a leak detecting
solutionoperations would NOT
breach the vacuum
system?
Question:
A.) Addition of a system
Answer:
component
B.) Removal of a system
component
C.) Replacement of
system component
with an identical
one
D.) Testing a system
component with a leak
detecting solution
Liquid ring compressors, D.) all of the above
service water and seal
water shall be treated
Updated Study Material 2026
Question:
Instrument air systems interconnection is prohibited
Answer:
shall be permitted to
interconnect with the
medical air system
provided the system
has
Question:
The scale range of 2/3
Answer:
positive pressure
analog indicators shall
have the normal
reading fall within the
percenta
ge of the gauge scale
What does it mean They are identified and published by an
when equipment, organization that is acceptable to the
material, or services are authority having jurisdiction.
shown as "listed"?
Fittings, valves, and Delivered sealed, labeled, and kept sealed.
other components for
oxygen use in a
Category 1
distribution system
shall be until
prepared for
installation.
Installers of Category 1 6010
medical gas piping
systems must be
qualified to ASSE 6010.
What is the
certification
requirement for
,installers of a
Category 3 system?
Question:
Metallic flexible joints B.)Suitable for service at 150 psig or above.
Answer:
are being used in the
pipeline for vibration
control. Which of the
following is NOT
required of such joints?
Question:
A.) Recieved on
Answer:
the jobsite with
certification of
cleanliness
B.) Suitable for service at
150 psig or above
C.) Provided with
extensions for brazing
D.) Able to withstand
1000?F
NFPA 99 specifies C.) combustible liquids
that the medical gas
system shall be
protected against
all EXCEPT which of
the following?
Question:
A.) Physical damage
Answer:
B.) Freezing
C.) combustible liquids
D.) Corrosion
A signal from each local alarm
system shall be
connected to the
, master alarm panels to
indicate that a
problem is present with
the source
Question:
equipment.
Answer:
Question:
Where existing, the reserve supply
Answer:
portion of the supply
equipment that
automatically supplies
the system when the
primary and
secondary are
unable.
Which of these D.) Testing a system component with a leak detecting
solutionoperations would NOT
breach the vacuum
system?
Question:
A.) Addition of a system
Answer:
component
B.) Removal of a system
component
C.) Replacement of
system component
with an identical
one
D.) Testing a system
component with a leak
detecting solution
Liquid ring compressors, D.) all of the above
service water and seal
water shall be treated
