BNSF Roadway Worker Protection Exam
with verified Questions and Answers Latest
Question 1
When are working limits required?
Correct Answer
Any time work may delay or stop rail movements.
Any time workers or equipment can not immediately get clear.
Any time physical conditions compromise sightlines or the ability to get clear.
ALL OF THE ABOVE.
Question 2
The method of on-track safety used depends on what factors?
Correct Answer
The work to be performed
The type of track on which the work will be performed
The weather and physical characteristics of the track
ALL OF THE ABVOVE
Question 3
A Watchman/Lookout is required for this type of on-track safety.
Correct Answer
Train approach warning
Page 1 of 6
, Question 4
A roadway worker shall not foul a track except :
Correct Answer
When necessary for the performance of duty.
Question 5
___________________ are tracks with track centers spaced less than 25 feet apart.
Correct Answer
Adjacent tracks
Question 6
Which category of on-track safety methods must be used if a project involves
equipment working in the foul?
Correct Answer
Working limits on controlled and non-controlled track.
Question 7
The following statement concerning working limits is NOT true.
Correct Answer
On controlled track, working limits require physically preventing trains or
equipment from entering a work site (for example: installing a derail, a discontinuity
in the rail, or throwing a switch to isolate disturbed track).
Question 8
The person ultimately responsible for adhering to client-specific safety requirements
is:
Correct Answer
The employee
Page 2 of 6
with verified Questions and Answers Latest
Question 1
When are working limits required?
Correct Answer
Any time work may delay or stop rail movements.
Any time workers or equipment can not immediately get clear.
Any time physical conditions compromise sightlines or the ability to get clear.
ALL OF THE ABOVE.
Question 2
The method of on-track safety used depends on what factors?
Correct Answer
The work to be performed
The type of track on which the work will be performed
The weather and physical characteristics of the track
ALL OF THE ABVOVE
Question 3
A Watchman/Lookout is required for this type of on-track safety.
Correct Answer
Train approach warning
Page 1 of 6
, Question 4
A roadway worker shall not foul a track except :
Correct Answer
When necessary for the performance of duty.
Question 5
___________________ are tracks with track centers spaced less than 25 feet apart.
Correct Answer
Adjacent tracks
Question 6
Which category of on-track safety methods must be used if a project involves
equipment working in the foul?
Correct Answer
Working limits on controlled and non-controlled track.
Question 7
The following statement concerning working limits is NOT true.
Correct Answer
On controlled track, working limits require physically preventing trains or
equipment from entering a work site (for example: installing a derail, a discontinuity
in the rail, or throwing a switch to isolate disturbed track).
Question 8
The person ultimately responsible for adhering to client-specific safety requirements
is:
Correct Answer
The employee
Page 2 of 6
