2026 IICRC AMRT CORE REVIEW QUESTIONS AND
ANSWERS SURE A+
✔✔turn it back on (re-establish negative air) let manager know - ✔✔Client turned AFD
off overnight. What do you do
✔✔HEPA vac & damp wipe - ✔✔How do you clean up a Condition 2 inside a wall
cavity?
✔✔remove and discard - ✔✔What is the treatment for moldy drywall?
✔✔abrasive methods followed by HEPA vacuuming - ✔✔What is the treatment for
moldy lumber in a wall cavity?
✔✔we remove the spores that settled overnight - ✔✔Why can HEPA vacuuming inside
the containment in the morning be helpful?
✔✔in the regular landfill - ✔✔Where is moldy demolition debris disposed?
✔✔remove, discard, replace - ✔✔What is the treatment for porous materials affected
with Condition 3?
✔✔damp wiping and HEPA vacuuming - ✔✔What is the treatment for hard surface
materials affected with Condition 3?
✔✔wipe, HEPA vacuuming - ✔✔What is the treatment for porous materials affected
with Condition 2?
✔✔can create the release of mold spores - ✔✔Spraying {misting) onto moldy surfaces
can cause what?
✔✔abrasive methods or treatment - ✔✔How is mold growth on wood framing removed?
, ✔✔the concern is too much carbon dioxide // we are monitoring oxygen - ✔✔When
using dry ice blasting inside a building, what is the concern and what parameter should
be monitored?
✔✔from the top to the bottom // then towards the negative air machines // then towards
the exit - ✔✔Where do we start deep cleaning inside the containment and where do we
clean to?
✔✔HEPA Vacuuming, Damp Wiping, hot water extraction - ✔✔Treatment of upholstery
furniture with condition 2 may include?
✔✔laundry as appropriate through materials - ✔✔How are linens and clothings with
Condition 2 cleaned?
✔✔cross contamination of cleaning area (during transport), others stored contents, and
not losing anything - ✔✔What are the concerns about cleaning contaminated contents
off-site?
✔✔created. document inventory, inspect, determine condition, document integrity and
placement of item, // separate unaffected from affected items - ✔✔What should you do
before moving contaminated contents?
✔✔cleaning done in clean area // cross contamination of cleaning area //
recontamination of items during or after cleaning // cross contamination of other stored
contents - ✔✔What do we need to consider when cleaning contaminated contents on-
site?
✔✔they cannot be restored because they have physical damage and discoloration -
✔✔Why can Condition 3 soft items seldomly be restored?
✔✔item description // quantity // condition // location in structure // inventory control
number // do not assign a value - ✔✔What should a written inventory include?
✔✔in a clean area or in a controlled ventilated environment without causing cross-
contamination - ✔✔Where should moldy contents be cleaned?
✔✔designated, safe, controlled environment - ✔✔Where should cleaned contents be
stored?
✔✔HEPA vacuuming // damp wiping - ✔✔How are non-porous items with condition 3
cleaned?
ANSWERS SURE A+
✔✔turn it back on (re-establish negative air) let manager know - ✔✔Client turned AFD
off overnight. What do you do
✔✔HEPA vac & damp wipe - ✔✔How do you clean up a Condition 2 inside a wall
cavity?
✔✔remove and discard - ✔✔What is the treatment for moldy drywall?
✔✔abrasive methods followed by HEPA vacuuming - ✔✔What is the treatment for
moldy lumber in a wall cavity?
✔✔we remove the spores that settled overnight - ✔✔Why can HEPA vacuuming inside
the containment in the morning be helpful?
✔✔in the regular landfill - ✔✔Where is moldy demolition debris disposed?
✔✔remove, discard, replace - ✔✔What is the treatment for porous materials affected
with Condition 3?
✔✔damp wiping and HEPA vacuuming - ✔✔What is the treatment for hard surface
materials affected with Condition 3?
✔✔wipe, HEPA vacuuming - ✔✔What is the treatment for porous materials affected
with Condition 2?
✔✔can create the release of mold spores - ✔✔Spraying {misting) onto moldy surfaces
can cause what?
✔✔abrasive methods or treatment - ✔✔How is mold growth on wood framing removed?
, ✔✔the concern is too much carbon dioxide // we are monitoring oxygen - ✔✔When
using dry ice blasting inside a building, what is the concern and what parameter should
be monitored?
✔✔from the top to the bottom // then towards the negative air machines // then towards
the exit - ✔✔Where do we start deep cleaning inside the containment and where do we
clean to?
✔✔HEPA Vacuuming, Damp Wiping, hot water extraction - ✔✔Treatment of upholstery
furniture with condition 2 may include?
✔✔laundry as appropriate through materials - ✔✔How are linens and clothings with
Condition 2 cleaned?
✔✔cross contamination of cleaning area (during transport), others stored contents, and
not losing anything - ✔✔What are the concerns about cleaning contaminated contents
off-site?
✔✔created. document inventory, inspect, determine condition, document integrity and
placement of item, // separate unaffected from affected items - ✔✔What should you do
before moving contaminated contents?
✔✔cleaning done in clean area // cross contamination of cleaning area //
recontamination of items during or after cleaning // cross contamination of other stored
contents - ✔✔What do we need to consider when cleaning contaminated contents on-
site?
✔✔they cannot be restored because they have physical damage and discoloration -
✔✔Why can Condition 3 soft items seldomly be restored?
✔✔item description // quantity // condition // location in structure // inventory control
number // do not assign a value - ✔✔What should a written inventory include?
✔✔in a clean area or in a controlled ventilated environment without causing cross-
contamination - ✔✔Where should moldy contents be cleaned?
✔✔designated, safe, controlled environment - ✔✔Where should cleaned contents be
stored?
✔✔HEPA vacuuming // damp wiping - ✔✔How are non-porous items with condition 3
cleaned?
