ASNT ULTRASONIC AND RADIOGRAPHIC TESTING REVIEW QUESTIONS WITH COMPLETE SOLUTION GUIDE

ASNT ULTRASONIC AND RADIOGRAPHIC
TESTING REVIEW QUESTIONS WITH
COMPLETE SOLUTION GUIDE

●● A. written and stated in general terms
Answer: CH1. 2 - The SNT-TC-1A Interpretation Panel will respond to
inquiries about SNT-TC-1A. The inquiry muct be:


●● B. SNT-TC-1A was first published in the late 1960s
Answer: CH1. 3 - Which of the following statements is true?


●● D. may engage an outside service but is, nevertheless, responsible
for the certification of the company's NDT personnel
Answer: CH1. 4 - With regard to the training of NDT personnel, the
employer:


●● B. to establish their own written practice for the qualification and
certification of their NDT personnel
Answer: CH1. 5 - SNT-TC-1A is intended as a guideline for employers:


●● C. The employer should review the detailed recommendations and
modify them, as necessary, to meet its particular needs

,Answer: CH1. 6 - The following is a statement in SNT-TC-1A: "It is
recognized that these guidelines may not be appropriate for certain
employers, circumstances, and/or applications." What should be done if
the guidelines are not appropriate?


●● D. A certifying agency is any organization used by an employer in
training NDT personnel
Answer: CH1. 7 - Which of the following statements is not true?


●● B. The individual's employer
Answer: CH1. 8 - Who should be responsible to asses whether or not an
individual should be qualified and certified who does not perform NDT,
but monitors and evaluates NDT?


●● D. Holographic testing
Answer: CH1. 9 - To which of the following NDT methods is SNT-TC-
1A currently not applicable?


●● a. with flexibility and reason
Answer: CH1. 10 - ASNT intended that the recommendations of SNT-
TC-1A be applied:


●● c. The employer

,Answer: CH1. 11 - Of the following, which is most appropriate to
determine the needs to qualify and certify personnel whose only NDT
function is to operate digital thickness equipment?


●● b. written testimony of qualification
Answer: CH1. 12 - Certification is:


●● c. it has been specified by the customer
Answer: CH1. 13 - Use of SNT-TC-1A is mandatory when:


●● c. Level I, Level II, and Level III
Answer: CH1. 14 - The basic levels of qualification recommended by
SNT-TC-1A are:


●● d. Whether any NDT personnel should be qualified and certified
depends solely upon the needs of the employer and the requirements of
the employer's customers or clientele
Answer: CH1. 15 - Should personnel that operate ultrasonic digital
thickness measurement equipment be qualified and certified?


●● a. The Trainee may not conduct nondestructive tests independently
and may not report test results
Answer: CH1. 16 - According to the recommendations of SNT-TC-1A,
which of the following is true concerning a Trainee's activities?

, ●● b. Must train and examine the Level I and II personnel in his or her
organization
Answer: CH1. 17 - According to SNT-TC-1A, which of the following is
not true for a Level III?


●● d. all of the above, and record test results
Answer: CH1. 18 - According to written instructions, an NDT Level I
may be qualified to perform:


●● a. Yes, the intent in SNT-TC-1A is that the Level I may perform the
above functions provided that they are in accordance with written
instructions of a Level II or III
Answer: CH1. 19 - May a Level I independently perform, evaluate, and
sign for results of nondestructive tests with supervision and guidance
from a Level II or III?


●● a. The qualifications for Level III equal and exceed those of Level II
Answer: CH1. 20 - Which of the following statements is true concerning
the definitions of Trainee, Level I, II and III in SNT-TC-1A?


●● c. Establish techniques
Answer: CH1. 21 - Which of the following is not within the scope of
activities of a Level II individual, as recommended in SNT-TC-1A?