Certified Playground Safety Inspector CPSI
Exam 74 Questions|Actual Questions and
Verified Answers| Updated
https://www.stuvia.com/user/thinktrek
+1(305) 565-6365
, To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - Answer
provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard exists on - Answer a
partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of surfacing material - Answer
Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a swing that appears to be failing, a
CPSI should - Answer hire a licensed professional engineer to certify the integrity of the equipment
5. Manufacturers of playground equipment must: provide the manufacturer's identification of the
equipment - Answer
6. The majority of injuries associated with playground equipment result from - Answer falls to the
surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it - Answer grabs the 5/8"
(16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements of - Answer ASTM F1292
and F1487
9. Regarding playground safety signage, which of the following is correct - Answer Signage may not
prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining the frequency of inspections of
surfacing - Answer Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that is chosen must - Answer be
appropriate for the age of intended users
12. A spring rocker with seat height of 26" is about to be installed adjacent to the side of a fully enclosed
bucket swing set. The minimum distance required between the swing set and the rocker is - Answer
108" or 9'
13. The Site History File for a playground should contains - Answer a comprehensive inventory of all
equipment, a parts list, maintenance, and inspection recommendations
14. What is the minimum use zone between a stand-alone climber and a standing-rocking/springing
playground piece - Answer 156" or 13'
15. The _____ of each play structure shall provide clear and concise inspection instructions - Answer
Manufacturer
Exam 74 Questions|Actual Questions and
Verified Answers| Updated
https://www.stuvia.com/user/thinktrek
+1(305) 565-6365
, To be compliant with ASTM 1487, a designer or manufacturer of playground equipment should - Answer
provide buyers with a parts list for the playground
2. The fish or wedge probe is used to determine whether or not a hazard exists on - Answer a
partially bounded opening
3. Which of the following is correct regarding the impact-attenuation of surfacing material - Answer
Critical height must equal or exceed fall height
4. When evaluating the structural integrity of a support structure for a swing that appears to be failing, a
CPSI should - Answer hire a licensed professional engineer to certify the integrity of the equipment
5. Manufacturers of playground equipment must: provide the manufacturer's identification of the
equipment - Answer
6. The majority of injuries associated with playground equipment result from - Answer falls to the
surface on which the equipment was located
7. An opening may present a common crush or shear hazard only if it - Answer grabs the 5/8"
(16mm) dowel
8. The criteria for unitary surface materials includes meeting requirements of - Answer ASTM F1292
and F1487
9. Regarding playground safety signage, which of the following is correct - Answer Signage may not
prevent accidents but may reduce liability
10. Which of the following factors is MOST important when determining the frequency of inspections of
surfacing - Answer Type of surfacing and amount of use
11. When planning a playground for public use, the play equipment that is chosen must - Answer be
appropriate for the age of intended users
12. A spring rocker with seat height of 26" is about to be installed adjacent to the side of a fully enclosed
bucket swing set. The minimum distance required between the swing set and the rocker is - Answer
108" or 9'
13. The Site History File for a playground should contains - Answer a comprehensive inventory of all
equipment, a parts list, maintenance, and inspection recommendations
14. What is the minimum use zone between a stand-alone climber and a standing-rocking/springing
playground piece - Answer 156" or 13'
15. The _____ of each play structure shall provide clear and concise inspection instructions - Answer
Manufacturer
